• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Hoses & Clamps Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc
Exoracing Gold and Silver Velcro Heat Sleeve 0.5m
Exoracing Gold and Silver Velcro Heat Sleeve 0.5m 20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Back to products
Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc
Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc 200,99 €

Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc

133,99 €

6pc silicone hose kit for compatible Honda Civic / Integra B16 B18 layouts. Includes 4-ply hoses, 304 stainless clamps and lifetime warranty.

Compare
Add to wishlist
SKU: EX-SILI-B16 Category: Hoses & Clamps Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Silicone Hose Kit For Your B-Series Honda

The Exoracing 6pc silicone hose kit replaces ageing coolant and heater hoses on compatible Honda Civic and Integra B16/B18 setups with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for owners refreshing tired OEM rubber hoses, improving cooling-system reliability, or tidying a B-series engine bay.

  • Fitment: Honda Civic / Integra B16 and B18 hose layouts shown in the table below.
  • Not for B18C4 out of the box: B18C4 setups require modification and should not be bought as a direct-fit kit.
  • Included: 6 silicone hoses, full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty.
  • Material: high-grade 4-ply reinforced silicone with 4.5mm wall thickness.
  • Best time to fit: install while draining coolant, replacing the radiator, doing a B-series swap, or refreshing an older cooling system.

Important: compare your existing hose layout and the hose-location table before ordering, especially if your car is engine-swapped, B18C4, imported, turbocharged or using aftermarket cooling parts.

Fitment And Compatibility

This kit is for compatible Honda Civic and Integra B16/B18 coolant and heater hose layouts. It includes six reinforced silicone hoses and the clamp kit needed to replace the matching original hoses.

  • Fits: B16/B18 setups that match the six hose locations and Honda references listed below.
  • Check first: engine-swapped cars, imported cars, turbo builds, aftermarket radiators and modified coolant/heater routing should compare the hose layout before ordering.
  • B18C4 note: This kit does not fit B18C4 out of the box. It may be made to fit with modification, but it should not be treated as direct fitment.
  • Does not fit: D-series, K-series, H-series or custom coolant routing as a complete hose kit.

If you are not sure whether your B-series hose layout matches, contact us before ordering.

Why Should You Use An Exoracing B16/B18 Silicone Hose Kit?

Old Honda rubber coolant hoses can harden, crack and swell after years of heat cycles, coolant exposure and engine-bay temperature. A failed coolant or heater hose can quickly lead to coolant loss, overheating and avoidable engine damage.

The Exoracing B-series silicone hose kit upgrades the matching original hoses to reinforced 4-ply silicone. The kit includes six hoses plus a full 304 stainless steel worm drive clamp kit, so you can refresh the main B16/B18 hose set without reusing tired clamps.

The black outer with purple inner layer gives a clean engine bay finish while adding resistance to heat, UV, water and ageing. It is a practical upgrade for road cars, track cars, B-series swaps and restored Civic or Integra engine bays.

For fitting help, read our silicone hose kit installation guide. For more cooling and hose products, browse the Exoracing heat management collection.

Purchase Includes:

  • 6 x Exoracing B-series reinforced silicone hoses
  • 1 x Exoracing 304 stainless steel worm drive clamp kit
  • 1 x Exoracing Lifetime Warranty

Features:

  • Designed for compatible Honda Civic / Integra B16 and B18 hose layouts
  • Replaces the six listed coolant and heater hoses
  • Includes a 304 stainless steel worm drive clamp kit
  • Manufactured from high-quality 4-ply reinforced silicone
  • 4.5mm wall thickness
  • Working pressure: 85 PSI
  • Burst pressure: 245 PSI
  • Operating temperature range: -65°F/-54°C to 500°F/260°C
  • Black outer finish with purple inner layer
  • Includes Exoracing lifetime warranty

Exoracing Honda B16/B18 Silicone Hose Kit Installation Guide:

Install this kit while the engine is cold and the coolant system is drained.

  1. Make sure the engine is completely cold before opening the cooling system.
  2. Safely raise the car if extra access is required and place a drain pan under the radiator drain point.
  3. Remove the radiator cap, drain the coolant and dispose of old coolant responsibly.
  4. Lay out the six silicone hoses and match each hose to the location table below.
  5. Remove one old hose at a time and fit the matching Exoracing silicone hose in the same location.
  6. Make sure each hose is fully seated on the pipe neck before tightening the supplied 304 stainless clamp.
  7. Do not over-tighten clamps, as excessive clamp force can damage silicone hoses.
  8. Refill the cooling system with suitable coolant and bleed the system fully.
  9. Run the engine up to temperature, check for leaks, then recheck the coolant level once the engine cools.

Installation difficulty: moderate DIY. Professional installation is recommended if you are not confident in draining and bleeding a cooling system.

Technical Specifications:

Specification Details
Product Type Silicone coolant and heater hose kit
Fitment Honda Civic / Integra B16/B18 hose layouts; not B18C4 direct fit
Kit Quantity 6 silicone hoses
Colour Black with purple inner layer
Material High-grade 4-ply reinforced silicone
Wall Thickness 4.5mm
Working Pressure 85 PSI
Burst Pressure 245 PSI
Operating Temperature -65°F/-54°C to 500°F/260°C
Clamp Material 304 grade stainless steel worm drive clamps
Warranty Exoracing Lifetime Warranty

Exoracing B-Series Silicone Hose Kit Location Table:

Use this table to match each silicone hose to the correct B-series coolant or heater hose location. These Honda references are included to help you cross-check the layout before ordering or fitting.

Hose No. Hose Location Honda Reference
1 Upper radiator hose 19501-P30-000
2 Lower radiator hose 19502-P30-000
3 Water bypass outlet hose 19508-P08-000
4 Heater hose 79725-S04-J30
5 Heater hose 79721-SR3-J30
6 Heater hose 79722-SR3-000

Frequently Asked Questions

Will this fit my Honda Civic or Integra B-series?

It is designed for B16/B18 hose layouts that match the six listed hose locations. Compare your existing hoses before ordering if your car is swapped, imported or modified.

Will this fit a B18C4?

Not out of the box. The current fitment note is that B18C4 requires modification, so do not buy this as a direct-fit B18C4 hose kit.

Does this include clamps?

Yes. The kit includes a 304 stainless steel worm drive clamp kit, so you do not need to reuse old coolant hose clamps.

Does this include every hose in the engine bay?

No. It includes the six coolant and heater hoses listed in the location table. Compare your hose layout before ordering if your car has custom routing.

When should I fit this kit?

The best time to fit it is while the coolant system is already drained, such as during radiator replacement, B-series swap work, coolant service or engine-bay refresh work.

Notes:

  • This kit is for matching Honda Civic / Integra B16/B18 hose layouts.
  • This kit will not fit B18C4 out of the box. It may be made to fit with modification, but it is not a direct fitment.
  • Engine-swapped, imported, turbocharged or modified cars should compare hose routing before ordering.
  • Install only when the engine is cold to reduce the risk of burns from hot coolant.
  • Bleed the cooling system fully after installation and check for leaks after the first heat cycle.
  • Professional installation is always recommended.

Official product information supplied by Exoracing.

Additional information
Weight 0,5 kg
Dimensions 45 × 12 × 25 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc

Hoses & Clamps
200,99 €
10pc silicone hose kit for 92-00 Honda Civic D-series D15/D16. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T-Bolt Clamp Silicone Hose Coupler

Hoses & Clamps
20,09 €
Shop Exoracing stainless steel T bolt clamps for silicone hose couplers, intercooler pipes and boosted intake pipework. Choose 52-62mm up to 105-113mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic Ep3 K20 K20a2 13pc

Hoses & Clamps
200,99 €
13pc silicone hose kit for UK/RHD Honda Civic EP3 Type R K20A2. Includes 4-ply hoses and 304 stainless clamp kit.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Black Silicone Vacuum Hose 4/5/6mm

Hoses & Clamps
9,37 € – 93,79 €Price range: 9,37 € through 93,79 €
Black silicone vacuum hose for boost, MAP, FPR and gauge signal lines. Choose 4mm, 5mm or 6mm ID in 1m, 3m or 10m lengths.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pc

Hoses & Clamps
200,99 €
14pc silicone hose kit for Honda Civic FN2 Type R K20Z4. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account