• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Hoses & Clamps Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pc
20 x Exoracing Wheel Nuts Forged Steel or Aluminium
20 x Exoracing Wheel Nuts Forged Steel or Aluminium 80,39 €
Back to products
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-Series
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-Series 133,99 €

Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pc

200,99 €

14pc silicone hose kit for Honda Civic FN2 Type R K20Z4. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.

Compare
Add to wishlist
SKU: EX-SILI-K20Z4 Category: Hoses & Clamps Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Silicone Hose Kit For Your Honda Civic FN2 K20Z4

The Exoracing 14pc silicone hose kit replaces the ageing coolant and vacuum hoses on a Honda Civic FN2 Type R K20Z4 with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for FN2 owners refreshing tired OEM rubber hoses, preventing cooling-system failure, or tidying the engine bay.

  • Fitment: Honda Civic FN2 Type R K20Z4.
  • Check before ordering: if your car is LHD, imported, engine-swapped or has modified cooling/vacuum routing, compare your hose layout before buying.
  • Included: 14 silicone hoses, full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty.
  • Material: high-grade 4-ply reinforced silicone with 4.5mm wall thickness.
  • Best time to fit: install while draining coolant, replacing the radiator, refreshing the cooling system, or doing K20Z4 maintenance.

Important: this kit is moulded for the Civic FN2 K20Z4 chassis. It does not fit EP3, DC5, FD2 or other K-series chassis as a complete hose kit.

Fitment And Compatibility

This kit is for the Honda Civic FN2 Type R with the K20Z4 engine. It replaces the listed coolant and vacuum hoses in the FN2 engine bay and includes the clamp kit needed to complete the hose refresh.

  • Fits: Honda Civic FN2 Type R K20Z4 with matching hose routing.
  • Check first: LHD cars, imported cars, engine-swapped cars and cars with aftermarket radiators, intake manifolds, or modified coolant/vacuum routing should compare the hose layout before ordering.
  • Does not fit: EP3 K20A2, DC5, FD2, K-swap cars, FN2 1.8 models or other K-series engines as a complete kit.
  • Need EP3 fitment? use the Exoracing Civic EP3 K20A2 13pc silicone hose kit instead.

If you are not sure whether your FN2 hose layout matches, contact us before ordering.

Why Should You Use An Exoracing FN2 Silicone Hose Kit?

Factory Honda rubber hoses can become brittle with age, heat cycles and coolant exposure. On an FN2 Type R, a ruptured coolant hose can cause rapid coolant loss, overheating and avoidable engine damage.

The Exoracing FN2 hose kit upgrades the original rubber hoses to reinforced 4-ply silicone. The kit includes 14 hoses and a full 304 stainless steel worm drive clamp kit, so you can refresh the cooling and vacuum hose system in one job rather than sourcing clamps separately.

The black outer with purple inner layer gives a tidy engine bay finish while adding resistance to heat, UV, water and ageing. It is a practical upgrade for road cars, track cars and restored FN2 K20Z4 engine bays where cooling-system reliability matters.

For fitting help, read our silicone hose kit installation guide. For more cooling and hose products, browse the Exoracing heat management collection.

Purchase Includes:

  • 14 x Exoracing FN2 reinforced silicone hoses
  • 1 x Exoracing 304 stainless steel worm drive clamp kit
  • 1 x Exoracing Lifetime Warranty

Features:

  • Designed for Honda Civic FN2 Type R K20Z4 hose layouts
  • Replaces the listed coolant and vacuum hoses in the FN2 K20Z4 engine bay
  • Includes a complete 14-piece silicone hose kit
  • Includes a 304 stainless steel worm drive clamp kit
  • Manufactured from high-quality 4-ply reinforced silicone
  • 4.5mm wall thickness
  • Working pressure: 85 PSI
  • Operating temperature range: -65°F/-54°C to 500°F/260°C
  • Black outer finish with purple inner layer
  • Includes Exoracing lifetime warranty

Exoracing FN2 Silicone Hose Kit Installation Guide:

Before installation, lay out the 14 silicone hoses and match every hose to the original hose it will replace.

  1. Make sure the engine is completely cold before opening the cooling system.
  2. Safely raise the car if extra access is required and place a drain pan under the radiator drain point.
  3. Remove the radiator cap, drain the coolant and dispose of old coolant responsibly.
  4. Lay out the 14 silicone hoses and match them against the original hoses before removing everything.
  5. Remove one old hose at a time and install the matching Exoracing silicone hose in the same location.
  6. Make sure each hose is fully seated on the pipe neck before tightening the supplied 304 stainless clamp.
  7. Do not over-tighten clamps, as excessive clamp force can damage silicone hoses.
  8. Refill the cooling system with suitable coolant and bleed the system fully.
  9. Run the engine up to temperature, check for leaks, then recheck the coolant level once the engine cools.

Installation difficulty: moderate DIY. Professional installation is recommended if you are not confident in draining and bleeding a cooling system.

Technical Specifications:

Specification Details
Product Type Silicone coolant and vacuum hose kit
Fitment Honda Civic FN2 Type R K20Z4 with matching hose routing
Kit Quantity 14 silicone hoses
Colour Black with purple inner layer
Material High-grade 4-ply reinforced silicone
Wall Thickness 4.5mm
Working Pressure 85 PSI
Burst Pressure 245 PSI
Operating Temperature -65°F/-54°C to 500°F/260°C
Clamp Material 304 grade stainless steel worm drive clamps
Warranty Exoracing Lifetime Warranty

Frequently Asked Questions

Will this fit my Honda Civic FN2 Type R?

It is designed for Honda Civic FN2 Type R K20Z4 models with matching hose routing. If your car is LHD, imported, engine-swapped or modified, compare your hose layout before ordering.

Will this fit an EP3 K20A2?

No. EP3 K20A2 models need the Exoracing Civic EP3 K20A2 13pc silicone hose kit.

Will this fit a DC5 or an FD2?

No, this listing is for the Civic FN2 K20Z4 chassis and should not be bought for DC5, FD2 or other K-series chassis as a complete hose kit.

Does this include every hose in the engine bay?

No. It includes the 14 coolant and vacuum hoses in this kit, plus the 304 stainless steel clamp kit. Compare the hoses in your engine bay before ordering if your car is not a standard FN2 K20Z4.

Do I need extra clamps?

No, the kit includes a full 304 stainless steel worm drive clamp kit. Replace any unrelated hardware separately if it is damaged or corroded.

Notes:

  • Designed for Honda Civic FN2 Type R K20Z4 hose layouts.
  • LHD, imported or modified FN2 owners should compare the hose layout before ordering.
  • This kit does not fit Honda Civic EP3, Honda Integra DC5 or Honda Civic FD2 as a complete hose kit.
  • Install only when the engine is cold to reduce the risk of burns from hot coolant.
  • Bleed the cooling system fully after installation and check for leaks after the first heat cycle.
  • Professional installation is always recommended.

Official product information supplied by Exoracing.

Additional information
Weight 0,5 kg
Dimensions 45 × 12 × 25 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Black Silicone Vacuum Hose 4/5/6mm

Hoses & Clamps
9,37 € – 93,79 €Price range: 9,37 € through 93,79 €
Black silicone vacuum hose for boost, MAP, FPR and gauge signal lines. Choose 4mm, 5mm or 6mm ID in 1m, 3m or 10m lengths.
Add to wishlist
Select options
Quick view
Compare

Exoracing T-Bolt Clamp Silicone Hose Coupler

Hoses & Clamps
20,09 €
Shop Exoracing stainless steel T bolt clamps for silicone hose couplers, intercooler pipes and boosted intake pipework. Choose 52-62mm up to 105-113mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc

Hoses & Clamps
133,99 €
6pc silicone hose kit for compatible Honda Civic / Integra B16 B18 layouts. Includes 4-ply hoses, 304 stainless clamps and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc

Hoses & Clamps
200,99 €
10pc silicone hose kit for 92-00 Honda Civic D-series D15/D16. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic Ep3 K20 K20a2 13pc

Hoses & Clamps
200,99 €
13pc silicone hose kit for UK/RHD Honda Civic EP3 Type R K20A2. Includes 4-ply hoses and 304 stainless clamp kit.
Add to wishlist
Add to cart
Quick view
Compare

10 x Exoracing Stainless Steel Cable Ties

Hoses & Clamps
13,39 €
Pack of 10 Exoracing stainless steel cable ties for exhaust wrap, heat sleeving, wiring and high-heat areas. Choose 200mm or 300mm lengths.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account