• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Accessories Tools Exoracing Magnetic AN Vice Jaws 6061 Billet Aluminium
Exoracing Adjustable AN Wrench Spanner AN03-AN16
Exoracing Adjustable AN Wrench Spanner AN03-AN16 66,99 €
Back to products
Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm
Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm 26,79 €

Exoracing Magnetic AN Vice Jaws 6061 Billet Aluminium

53,59 €

Clear
Compare
Add to wishlist
SKU: EX-ALU-VIC Category: Tools Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Why Use Exoracing Magnetic AN Vice Jaws?

Have you ever tried to make AN lines and realised that you are damaging the fittings? This is where Exoracing magnetic AN vice jaws come in. They are machined from 6061 billet aluminium and include 3 x strong neodymium magnets in each half to fit perfectly inside a vice without slipping.

The benefit of using one of these is that they are shaped perfectly to fit AN fittings from AN03 up to AN20. Being machined from aluminium and anodised, they will not scratch the fittings as you install them onto the AN line.

These inserts are designed to make fitting lines easier by securely holding the fittings in place. Their unique hexagonal shape perfectly matches AN fittings. Another massive advantage is that you can assemble the lines horizontally or vertically due to the unique shape machined into the aluminium.

The inserts are also equipped with a magnetic backing, which keeps them in place inside the vice even when not fully clamped. These jaws can accommodate AN fittings ranging from AN03 to AN20, making them versatile tools for any line-fitting project.

We offer these in anodised black and blue, so you can choose whichever style suits you best. With the Exoracing aluminium vice jaw inserts you can say goodbye to the struggles of fitting AN lines and achieve seamless, damage-free results.

We also offer an Exoracing lifetime warranty against manufacturing defects for a risk-free buying experience.

Purchase Includes:

  • 2 x Exoracing Magnetic AN Vice Jaw Halves
  • 1 x Exoracing Lifetime Warranty

Features:

  • Specifically designed for assembling AN fittings and hose
  • Anodised aluminium to prevent fittings from scratching
  • Dimensions: 40mm x 32.5mm x 102mm
  • Material: 6061 Billet aluminium
  • Colour: Anodised Black or Blue
  • Features: Neodymium Magnetic backing
  • Weight: 420g
  • Exoracing Lifetime Warranty

How To Use Exoracing Magnetic Vice Jaws:

Magnetic vice jaws are incredibly simple and easy to use; follow the steps below:

  1. First, open up the vice to allow the vaws to fit inside.
  2. Next, remove the two halves and place one half in the vice with the magnets pointing towards the outside and the lip on top of the vice. The strong neodymium magnets should hold the vice jaws in place.
  3. Follow step 2 for the second vice jaws on the opposite side of the vice.
  4. Now, you can start assembling your AN fittings by placing them horizontally or vertically in the vice (if you’re unsure, reference our photos at the top).
  5. You are all set up to start creating your first AN assembly! If you get any good photos, then make sure to tag us on social media, as we would love to see them!

Technical Specifications:

Vice Jaw Material: 6061 Billet Aluminium
Magnet Material: Neodymium
Available Colours: Black, Blue
Dimensions: 40mm x 32.5mm x 102mm
Weight: 420g
Warranty: Exoracing Lifetime Warranty

Frequently Asked Questions:

My Fittings Scratched When I Used The Vice Jaws?

The only way they could have scratched is if the AN fittings weren’t made from aluminium, they weren’t held tight enough or in the correct position in the vice jaws, or you used a spanner to install them that wasn’t made from aluminium, such as our Exoracing AN spanners.

Notes:

  • Please ensure your fittings are seated correctly; if they slip, they will damage and become scratched.
  • Always use an AN spanner or wrench paired with the vice jaws for the perfect finish with no scratches.
  • It is incompatible with steel or stainless steel fittings; only aluminium AN fittings.
  • If you are unsure how to assemble AN fittings, don’t hesitate to contact a professional.

Official product information supplied by Exoracing.

Additional information
Weight 0,42 kg
Dimensions 10 × 7 × 7 cm
Colour

Black, Blue

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Adjustable AN Wrench Spanner AN03-AN16

Tools
66,99 €
Why Use An Exoracing Adjustable AN Wrench Spanner? If you want to ensure your AN fittings remain scratch-free during installation,
Add to wishlist
Select options
Quick view
Compare

Exoracing 10pc Heat Shrink Tags 3:1

Tools
14,73 € – 18,75 €Price range: 14,73 € through 18,75 €
Exoracing 10pc 3:1 heat shrink tags for finishing heat sleeve, AN hose, braided sleeve and wiring looms. Choose 18mm or 39mm pre-shrink sizes.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account