• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Turbo Gaskets & Oil Fittings Exoracing T3 Turbocharger Gasket
Exoracing Titanium Intake Exhaust Manifold Nut and Stud Kit
Exoracing Titanium Intake Exhaust Manifold Nut and Stud Kit 20,09 € – 160,79 €Price range: 20,09 € through 160,79 €
Back to products
Exoracing 38mm External Wastegate Gasket
Exoracing 38mm External Wastegate Gasket 20,09 €

Exoracing T3 Turbocharger Gasket

20,09 €

Exoracing T3 turbocharger gasket for turbo to manifold flanges. Choose 304 stainless steel or aluminium composite. 85mm x 44mm bolt centres.

Clear
Compare
Add to wishlist
SKU: EX-TURB-GAS Category: Turbo Gaskets & Oil Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right T3 Turbo Gasket For Your Flange

The Exoracing T3 turbocharger gasket is designed to seal a T3 turbo to manifold flange and help stop exhaust gas leaks that can reduce boost response, power and reliability. It is available in 304 stainless steel or aluminium composite, depending on your flange condition and installation needs.

  • Fitment: T3 turbo to manifold flange
  • Bolt centres: 85mm horizontally and 44mm vertically
  • Material options: 304 stainless steel or perforated aluminium composite
  • Thickness: stainless steel 0.5mm / aluminium composite 2mm
  • Included: 1 T3 turbocharger gasket and Exoracing lifetime warranty

Important: check your flange type and bolt-centre measurements before ordering. If the mating flanges are warped, resurface them before fitting a new gasket to reduce the chance of another blowout.

Why Use An Exoracing T3 Turbocharger Gasket?

A leaking or blown turbo gasket can let exhaust gas escape before it reaches the turbine. This can cause slower spool, reduced boost response, loss of power, unwanted noise and repeated gasket failure if the root cause is not fixed.

The Exoracing T3 turbocharger gasket is made to sit between a T3 turbo and manifold flange, creating a reliable seal when fitted to clean, flat mating surfaces. It is a useful replacement whenever the turbo is removed, the manifold is changed, or an old gasket has started leaking.

Choose the 304 stainless steel version for most installations where the flanges are flat and in good condition. Choose the aluminium composite version if you need the thicker 2mm gasket or have very slight surface imperfections, while still checking that the flanges are not warped.

If your previous gasket has blown out, do not just fit a new gasket and hope for the best. Check both mating faces with a straight edge and resurface the turbo or manifold flange if needed.

Which Material Should I Choose?

  • 304 Stainless Steel: best for most flat, correctly surfaced T3 turbo to manifold flanges. Thickness: 0.5mm.
  • Aluminium Composite: useful when a slightly thicker gasket is required or when the flange has very minor imperfections. Thickness: 2mm.

Purchase Includes:

  • 1 x Exoracing T3 Turbocharger Gasket
  • 1 x Exoracing Lifetime Warranty

Features:

  • Fits T3 turbo to manifold flanges
  • Helps seal exhaust gas leaks before the turbo
  • Available in 304 stainless steel or aluminium composite
  • Stainless steel option has a pressed centre for improved sealing
  • Aluminium composite option is thicker for applications that need extra gasket depth
  • Useful replacement when removing or refitting a T3 turbo setup
  • Includes Exoracing lifetime warranty

Technical Specifications:

Specification Steel T3 Gasket Aluminium Composite T3 Gasket
Material 304 stainless steel Perforated aluminium composite
Thickness 0.5mm 2mm
Weight 14g 12g
Overall length 108mm 108mm
Overall height 66mm 66mm
Bolt centres horizontal 85mm 85mm
Bolt centres vertical 44mm 44mm
Application T3 turbo to manifold flange T3 turbo to manifold flange
Warranty Exoracing lifetime warranty Exoracing lifetime warranty

Installation Guide:

Professional installation is recommended if you are not confident working around turbocharger, oil, coolant or exhaust components.

  1. Allow the vehicle to cool fully before working around the turbocharger.
  2. Remove any parts needed to access the turbo to manifold flange, including oil, coolant or intake parts if required.
  3. Remove the turbo flange nuts or bolts and take out the old gasket.
  4. Clean both mating faces and check them with a straight edge. If either flange is warped, resurface it before fitting the new gasket.
  5. Fit the new Exoracing T3 turbocharger gasket in the correct orientation.
  6. Reinstall the turbo hardware and torque to the manufacturer’s specification.
  7. Run the car through heat cycles and recheck for leaks, loose hardware or boost loss.

Frequently Asked Questions

Will this fit my turbo?

This gasket is for T3 turbo to manifold flanges. Check your flange type and bolt-centre measurements before ordering. The bolt centres are 85mm horizontally and 44mm vertically.

Should I choose stainless steel or aluminium composite?

Choose stainless steel for most flat, correctly surfaced flanges. Choose aluminium composite if you need the thicker 2mm gasket or have very slight surface imperfections. Warped flanges should be resurfaced before fitting any new gasket.

Will this fix a boost leak?

It can fix a leak caused by a worn, split or blown T3 turbo gasket, but only if the mating flanges are clean, flat and correctly tightened. If the flange is warped, the new gasket may fail again.

When should I replace this gasket?

Replace it whenever the T3 turbo is removed, when changing the manifold, or when you see signs of exhaust gas leakage around the turbo to manifold flange.

Does it include bolts or nuts?

No. This listing includes the T3 turbocharger gasket and Exoracing lifetime warranty. Reuse suitable existing hardware only if it is in good condition, or replace hardware where needed.

Notes:

  • Check the gasket shape and bolt-centre measurements before ordering.
  • Make sure both turbo and manifold mating faces are clean and flat.
  • Resurface warped flanges before fitting a new gasket.
  • Tighten hardware to the vehicle or turbo/manifold manufacturer’s specification.
  • Professional installation is recommended.

Official product information supplied by Exoracing.

Additional information
Weight 0,05 kg
Dimensions 10 × 2 × 20 cm
Material

Stainless Steel, Aluminium Composite

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Turbo Oil Drain Gasket T25 T28

Turbo Gaskets & Oil Fittings
13,39 €
Why Use An Exoracing T25 Turbo Oil Drain Gasket? If you’ve ever experienced leaking from your turbocharger drain flange, it
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T4 Twinscroll Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T4 Twinscroll Turbo Gasket? We pride ourselves on delivering the best quality parts possible for your automotive
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Oil Pressure Sensor Adapter

Turbo Gaskets & Oil Fittings
26,79 €
Add a turbo oil feed, oil pressure gauge or oil temperature sensor using 304 stainless adapters. Choose BSPT, NPT, M10x1.0 or 4-port thread layouts.
Add to wishlist
Select options
Quick view
Compare

Exoracing Turbo Oil Feed And Drain Gaskets

Turbo Gaskets & Oil Fittings
13,39 €
Why Use Exoracing Oil Feed And Drain Gaskets? Have you ever noticed an oil leak from your turbocharger oil feed
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing An10 Turbo Oil Return Drain Fitting Stainless Steel

Turbo Gaskets & Oil Fittings
46,89 €
Why Use An Exoracing An10 Turbo Return Drain Fitting? If you are currently doing a turbo conversion or making a
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T25 T28 Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T25/T28 Turbo Gasket? At Exoracing, we are devoted to providing you with parts that exceed expectations. With
Add to wishlist
Add to cart
Quick view
Compare

Exoracing AN10 Turbo Oil Drain Flange Kit

Turbo Gaskets & Oil Fittings
26,79 €
Build a reliable AN10 turbo oil drain with Exoracing billet aluminium flange kit. Choose 40mm or 51mm bolt centres; includes gasket and M8 bolts.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account