• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Hoses & Clamps Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc
Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc
Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc 133,99 €
Back to products
Exoracing Gold And Silver Sewn Heat Sleeve 0.5m
Exoracing Gold And Silver Sewn Heat Sleeve 0.5m 20,09 € – 30,81 €Price range: 20,09 € through 30,81 €

Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc

200,99 €

10pc silicone hose kit for 92-00 Honda Civic D-series D15/D16. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.

Compare
Add to wishlist
SKU: EX-SILI-D15-D16 Category: Hoses & Clamps Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Silicone Hose Kit For Your D-Series Honda Civic

The Exoracing 10pc silicone hose kit replaces ageing coolant hoses on 1992-2000 Honda Civic D-series models with reinforced 4-ply silicone hoses and a full 304 stainless steel worm drive clamp kit. It is designed for Civic EG/EK D15 and D16 owners refreshing tired OEM rubber hoses, improving cooling-system reliability, or tidying the engine bay.

  • Fitment: Honda Civic EG/EK 1992-2000 D-series D15/D16 hose layouts.
  • Check before ordering: compare your existing hose layout if your car is imported, engine-swapped, turbocharged or running an aftermarket radiator/intake setup.
  • Included: 10 silicone hoses, a full 304 stainless steel worm drive clamp kit and Exoracing lifetime warranty.
  • Material: 4-ply polyester-reinforced silicone with 4.5mm wall thickness.
  • Best time to fit: install while draining coolant, replacing the radiator, doing engine-bay maintenance, or refreshing an older D-series cooling system.

Important: this is a D-series D15/D16 hose kit. It is not a complete hose kit for B-series, K-series, H-series, diesel or engine-swapped Civics.

Fitment And Compatibility

This kit is for Honda Civic EG/EK 1992-2000 models running D-series D15 or D16 coolant hose layouts. It includes the main 10 silicone hoses and the clamp kit needed to replace the matching rubber hoses in the engine bay.

  • Fits: Honda Civic EG/EK D15/D16 1992-2000 with matching D-series hose routing.
  • Check first: imported cars, engine-swapped cars, turbo builds and cars with aftermarket radiators, intake manifolds or custom coolant routing should compare the hose layout before ordering.
  • Does not fit: B16/B18, K-swap, H-swap, diesel or non-D-series Civic hose layouts as a complete kit.

If you are not sure whether your Civic uses the correct D15/D16 hose layout, contact us before ordering.

Why Should You Use An Exoracing Honda D-Series Silicone Hose Kit?

Original Honda rubber coolant hoses can harden, crack and swell after years of heat cycles, coolant exposure and engine-bay temperature. A failed coolant hose can quickly cause coolant loss, overheating and avoidable engine damage.

The Exoracing D-series silicone hose kit replaces old rubber hoses with reinforced 4-ply silicone. The kit includes 10 hoses plus a full 304 stainless steel worm drive clamp kit, so you can refresh the matching D15/D16 hose system in one job rather than reusing tired clamps.

The black outer with purple inner layer gives a clean engine bay finish while adding resistance to heat, UV, water and ageing. It is a practical reliability upgrade for road cars, track cars, turbo D-series builds and restored EG/EK Civic engine bays.

For fitting help, read our silicone hose kit installation guide. For more cooling and hose products, browse the Exoracing heat management collection.

Purchase Includes:

  • 10 x Exoracing D-series reinforced silicone hoses
  • 1 x Exoracing 304 stainless steel worm drive clamp kit
  • 1 x Exoracing Lifetime Warranty

Features:

  • Designed for Honda Civic EG/EK D15/D16 D-series hose layouts
  • Replaces ageing coolant hoses with reinforced silicone
  • Includes a complete 10-piece silicone hose kit
  • Includes a 304 stainless steel worm drive clamp kit
  • Manufactured from high-quality 4-ply polyester-reinforced silicone
  • 4.5mm wall thickness
  • Working pressure: 85 PSI
  • Burst pressure: 245 PSI
  • Operating temperature range: -60°C to 260°C
  • Black outer finish with purple inner layer
  • Includes Exoracing lifetime warranty

Exoracing D-Series Silicone Hose Kit Installation Guide:

Install this kit while the engine is cold and the coolant system is drained.

  1. Make sure the engine is completely cold before opening the cooling system.
  2. Safely raise the car if extra access is required and place a drain pan under the radiator drain point.
  3. Remove the radiator cap, drain the coolant and dispose of old coolant responsibly.
  4. Lay out the 10 silicone hoses and match each one against the original hose it will replace.
  5. Remove one old hose at a time and fit the matching Exoracing silicone hose in the same location.
  6. Make sure each hose is fully seated on the pipe neck before tightening the supplied 304 stainless clamp.
  7. Do not over-tighten clamps, as excessive clamp force can damage silicone hoses.
  8. Refill the cooling system with suitable coolant and bleed the system fully.
  9. Run the engine up to temperature, check for leaks, then recheck the coolant level once the engine cools.

Installation difficulty: moderate DIY. Professional installation is recommended if you are not confident in draining and bleeding a cooling system.

Technical Specifications:

Specification Details
Product Type Silicone coolant hose kit
Fitment Honda Civic EG/EK 1992-2000 D15/D16 D-series with matching hose routing
Kit Quantity 10 silicone hoses
Colour Black with purple inner layer
Material 4-ply polyester-reinforced silicone
Wall Thickness 4.5mm
Working Pressure 85 PSI
Burst Pressure 245 PSI
Operating Temperature -60°C to 260°C
Clamp Material 304 grade stainless steel worm drive clamps
Warranty Exoracing Lifetime Warranty

Frequently Asked Questions

Will this fit my 1992-2000 Honda Civic?

It is designed for Civic EG/EK D-series D15/D16 hose layouts. If your car has a B-series, K-series, H-series, diesel or swapped engine, do not buy this as a complete hose kit.

Will this fit a B16 or B18 Civic?

No. This listing is for D-series D15/D16 hose layouts, not B-series VTi, SiR or B-swapped cars.

Does this include clamps?

Yes. The kit includes a 304 stainless steel worm drive clamp kit, so you do not need to reuse old coolant hose clamps.

Does this include every hose in the engine bay?

No. It includes the 10 hoses in this D-series kit. Compare the hoses in your engine bay before ordering if your Civic is imported, modified or engine-swapped.

When should I fit this kit?

The best time to fit it is while the coolant system is already drained, such as during radiator replacement, coolant service, engine-bay refresh work or D-series maintenance.

Notes:

  • Designed for Honda Civic EG/EK 1992-2000 D-series D15/D16 hose layouts.
  • Not suitable as a complete hose kit for B-series, K-series, H-series, diesel or engine-swapped Civics.
  • Imported, modified, and turbocharged cars should compare hose routing before ordering.
  • Install only when the engine is cold to reduce the risk of burns from hot coolant.
  • Bleed the cooling system fully after installation and check for leaks after the first heat cycle.
  • Professional installation is always recommended.

Official product information supplied by Exoracing.

Additional information
Weight 1,2 kg
Dimensions 45 × 12 × 25 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Silicone Hose Kit For Honda Civic Ep3 K20 K20a2 13pc

Hoses & Clamps
200,99 €
13pc silicone hose kit for UK/RHD Honda Civic EP3 Type R K20A2. Includes 4-ply hoses and 304 stainless clamp kit.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pc

Hoses & Clamps
200,99 €
14pc silicone hose kit for Honda Civic FN2 Type R K20Z4. Includes 4-ply hoses, 304 stainless clamp kit and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T-Bolt Clamp Silicone Hose Coupler

Hoses & Clamps
20,09 €
Shop Exoracing stainless steel T bolt clamps for silicone hose couplers, intercooler pipes and boosted intake pipework. Choose 52-62mm up to 105-113mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing Black Silicone Vacuum Hose 4/5/6mm

Hoses & Clamps
9,37 € – 93,79 €Price range: 9,37 € through 93,79 €
Black silicone vacuum hose for boost, MAP, FPR and gauge signal lines. Choose 4mm, 5mm or 6mm ID in 1m, 3m or 10m lengths.
Add to wishlist
Select options
Quick view
Compare

10 x Exoracing Stainless Steel Cable Ties

Hoses & Clamps
13,39 €
Pack of 10 Exoracing stainless steel cable ties for exhaust wrap, heat sleeving, wiring and high-heat areas. Choose 200mm or 300mm lengths.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc

Hoses & Clamps
133,99 €
6pc silicone hose kit for compatible Honda Civic / Integra B16 B18 layouts. Includes 4-ply hoses, 304 stainless clamps and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account