• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Heat Protection Exoracing Gold And Silver Sewn Heat Sleeve 0.5m
Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc
Exoracing Silicone Hose Kit For Honda Civic D-Series 92-00 10pc 200,99 €
Back to products
Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5m
Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5m 20,09 € – 29,47 €Price range: 20,09 € through 29,47 €

Exoracing Gold And Silver Sewn Heat Sleeve 0.5m

20,09 € – 30,81 €Price range: 20,09 € through 30,81 €

Exoracing sewn heat sleeve protects hoses, wiring and lines from engine bay heat. Gold or silver, 15mm-30mm ID, 0.5m length, 260°C direct heat rated.

Clear
Compare
Add to wishlist
SKU: EX-SEW-SLEE Category: Heat Protection Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Sewn Heat Sleeve For Hoses, Wiring And Lines

Exoracing sewn heat sleeve is designed to protect hoses, wiring looms, oil lines, coolant lines and other engine bay parts from radiant heat. The sleeve slides over the part before installation, giving a clean permanent finish for planned hose, wiring and line routes. If you need to protect parts already fitted to the car, use Exoracing Velcro heat sleeve instead.

  • Length: supplied in 0.5m lengths. Order quantity 2 for one continuous 1m length.
  • Size options: 15mm ID, 20mm ID, 25mm ID and 30mm ID
  • Colour options: gold or silver
  • Temperature rating: 260°C direct / 600°C radiant / 1100°C melting temperature
  • Material: lightweight polymer-laminated glass cloth

Important: measure the outside diameter of the hose, cable or line you want to protect and choose the closest sleeve size up. If the route has tight bends or bulky fittings, choose the next size up. For more help, use our heat sleeve size chart.

Why Use Exoracing Sewn Heat Sleeve?

High engine bay temperatures can make hoses, wiring looms and fluid lines brittle over time. This is especially common near exhaust manifolds, turbochargers, downpipes and other high-heat areas.

Exoracing sewn heat sleeve helps reduce heat exposure by placing a protective reflective sleeve around the part you want to protect. It is ideal for planned installations where the hose, line or wiring can be fed through the sleeve before final fitting. For already-installed hoses or wiring, Velcro heat sleeve is usually the easier choice.

The sewn construction gives a tidy, durable finish, while the gold or silver outer layer helps reflect radiant heat away from the protected part. It is a strong choice for oil feed lines, coolant lines, breather hoses, wiring looms and other parts routed through hot engine bay areas.

Which Size Should I Choose?

  • 15mm ID: choose this for smaller hoses, wiring and compact line protection.
  • 20mm ID: choose this for medium hoses, wiring groups and general engine bay protection.
  • 25mm ID: choose this for larger hoses, thicker wiring looms or lines with extra movement.
  • 30mm ID: choose this for larger diameter hoses or where extra clearance is needed around bends or fittings.

Measure the outside diameter of the part, not the inside diameter. If the sleeve needs to pass over fittings, bends or connectors, size up to make installation easier. If you are between sizes, check our heat sleeve size chart before ordering.

Purchase Includes:

  • 1 x Exoracing sewn heat sleeve 0.5m
  • 1 x Exoracing lifetime warranty

Features:

  • Protects hoses, wiring, oil lines, coolant lines and looms from heat
  • Clean sewn edge for a tidy permanent installation
  • Reflective gold or silver outer finish
  • Lightweight polymer-laminated glass cloth construction
  • Can be cut to length with sharp scissors
  • Available in 15mm, 20mm, 25mm and 30mm ID sizes
  • Suitable for turbo, exhaust and high-heat engine bay areas
  • Includes Exoracing lifetime warranty

Technical Specifications:

Specification Details
Minimum temperature -40°C
Maximum continuous direct temperature 260°C
Maximum continuous radiant temperature 600°C
Melting temperature 1100°C
Material Lightweight polymer-laminated glass cloth
Chemical resistance Hydraulic fluids, fuels and oils
Colours Gold or silver
Length 0.5m per quantity, up to 1m continuous length
Available ID sizes 15mm, 20mm, 25mm, 30mm ID
Cutting tool Sharp scissors
Warranty Exoracing lifetime warranty

Installation Guide:

Sewn heat sleeve is best fitted before the hose, wiring or line is installed, as the protected part needs to be fed through the sleeve. If the part is already fitted and you do not want to disconnect it, use Exoracing Velcro heat sleeve.

  1. Measure the length of hose, cable or line you want to protect.
  2. Measure the outside diameter and choose the closest sleeve size up.
  3. Cut the sleeve to length using sharp scissors.
  4. Feed the hose, wiring or line through the sleeve.
  5. Route the protected part away from direct contact with exhaust or moving components.
  6. If needed, secure each end using stainless steel cable ties, heat shrink or wire.

Frequently Asked Questions

How do I choose the correct size?

Measure the outside diameter of the hose, cable or line you are protecting and choose the closest sleeve size up. If the route has tight bends or bulky fittings, choose the next size up.

What is sewn heat sleeve best used for?

It is best used for planned installations where hoses, wiring or lines can be fed through the sleeve before fitting. It gives a cleaner permanent finish than wrap-around sleeve.

What is the difference between sewn heat sleeve and Velcro heat sleeve?

Sewn heat sleeve is fed over the part before installation and gives a tidy permanent finish. Velcro heat sleeve is better when the hose, wiring or line is already fitted and you need to retrofit protection without disconnecting it.

Can I cut it to length?

Yes. Cut the sleeve to the required length using sharp scissors. Secure the ends if needed to keep the sleeve positioned correctly.

Should I choose gold or silver?

Both colours are designed for heat protection. Choose the colour that best matches your engine bay or surrounding heat-management products.

Notes:

  • Measure the outside diameter of the part you are protecting before ordering.
  • Choose the next size up for tight bends, bulky fittings or awkward routing.
  • Do not allow the sleeve to sit directly against moving parts or sharp edges.
  • For already-installed hoses or wiring, consider Velcro heat sleeve instead.
  • Professional installation is recommended if fitting near hot, moving or safety-critical components.

Official product information supplied by Exoracing.

Additional information
Weight 0,07 kg
Dimensions 20 × 5 × 26 cm
Choose Colour

Gold, Silver

Choose Sleeve ID Size

15mm ID, 20mm ID, 25mm ID, 30mm ID

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Gold and Silver Heat Reflective Tape

Heat Protection
40,19 € – 53,59 €Price range: 40,19 € through 53,59 €
Protect intake pipes, airboxes and panels from radiant heat with Exoracing gold or silver heat reflective tape. 5m or 10m rolls, adhesive, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Velcro Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Gold and silver Velcro heat sleeve for quick fit hose, wiring and AN line protection. Choose 15mm, 20mm, 25mm or 30mm ID. Rated to 250°C.
Add to wishlist
Select options
Quick view
Compare

Exoracing External Wastegate Blanket Titanium or Carbon

Heat Protection
87,09 € – 107,19 €Price range: 87,09 € through 107,19 €
External wastegate blanket for 38, 44, 50 and 60mm wastegates. Titanium or carbon finish, 1200°C rated insulation and locking wire included.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Heat Reflective Sheet 1m x 1.2m

Heat Protection
93,79 €
Protect panels, airboxes and bulkheads from radiant heat with Exoracing gold or silver heat reflective sheet. 1m x 1.2m, adhesive-backed, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5m

Heat Protection
20,09 € – 29,47 €Price range: 20,09 € through 29,47 €
Protect hoses, wiring and lines from engine bay heat with Exoracing silicone fibreglass heat sleeve. 260°C continuous, 1200°C short, sizes 8mm-30mm.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account