• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Sold out
Click to enlarge
Home Engine Heat Protection Exoracing Turbo Blanket V3
Exoracing Titanium or Carbon Exhaust Wrap
Exoracing Titanium or Carbon Exhaust Wrap
Back to products
KOSHIR GARAGE Carbon Fuel Pump Cover For Honda Civic EG EK ( Honda Civic 1992-2000 )
KOSHIR GARAGE Carbon Fuel Pump Cover For Honda Civic EG EK ( Honda Civic 1992-2000 ) 150,00 €

Exoracing Turbo Blanket V3

Exoracing Turbo Blanket V3 for T25, T3 and T4 turbochargers. 1200°C heat protection with carbon or titanium weave, stainless springs and lifetime warranty.

This product is currently out of stock and unavailable.

Compare
Add to wishlist
SKU: EX-TURB-BLAN Category: Heat Protection Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Turbo Blanket For Your Turbocharger

The Exoracing Turbo Blanket V3 is designed to contain heat around the turbine housing of your turbocharger. Keeping more heat inside the hot side of the turbo, it helps reduce radiant engine bay heat, protects nearby hoses, wiring, paint, intake pipework and fluid lines, and improves heat control on turbocharged road, track and drift cars.

  • Turbo size options: choose T25, T3 or T4 based on your turbo frame size and turbine housing measurements.
  • Colour options: choose Titanium or Carbon to match your engine bay finish.
  • Construction: carbon or titanium weave exterior, silica insulation wool centre and stainless steel wire mesh interior.
  • Temperature rating: working temperature up to 1200°C / 2100°F.
  • Included: 1 Exoracing Turbo Blanket V3, 2 stainless steel spring fasteners and Exoracing lifetime warranty.

Important: fit the blanket only to a clean, leak-free turbo setup. Check for oil, fuel, coolant or power steering fluid leaks before installation.

Which Turbo Blanket Size Should I Choose?

Choosing the correct turbo blanket size matters. A blanket that is too small may not cover the turbine housing properly, while one that is too large can sit loose and move around once the car is running.

  • T25: choose this for smaller T25 frame turbochargers and compact turbine housings. Approximate inner circumference is 17 inches, and approximate inner width is 2.25 inches.
  • T3: Choose this for medium T3 frame turbochargers. Approximate inner circumference is 19 inches, and approximate inner width is 3.0 inches.
  • T4: choose this for larger T4 frame turbochargers. Approximate inner circumference is 22 inches, and approximate inner width is 3.5 inches.

Measure the turbine housing before ordering. The blanket should sit snugly around the hot side of the turbo without needing to be forced into place or sitting loose enough to move around.

Exoracing turbo blanket sizing guide showing T25 T3 and T4 turbo measurements

Turbo Blanket Size Guide

Turbo Blanket Size Approx Inner Circumference Approx Inner Width
T25 17 inches 2.25 inches
T3 19 inches 3.0 inches
T4 22 inches 3.5 inches

Why Use The Exoracing Turbo Blanket V3?

Turbochargers create extreme heat around the turbine housing. If that heat is left unmanaged, it can radiate into the engine bay and affect hoses, wiring, paintwork, intake pipework, brake lines, oil lines, coolant lines and nearby components.

The Exoracing Turbo Blanket V3 helps contain heat at the turbocharger hot side. This reduces radiant heat around the turbo and gives nearby components a better chance of surviving hard road, track, drift and dyno use.

Keeping more heat inside the turbine housing can also help the turbo system behave more consistently, especially during repeated pulls, long sessions or high load use.

The V3 design uses a 4-layer construction with a carbon or titanium weave exterior, silica insulation wool centre and stainless steel wire mesh interior. Stainless steel hook anchors and spring fasteners help keep the blanket secured around the turbine housing.

When Should You Fit A Turbo Blanket?

  • Your turbo sits close to wiring, hoses, brake lines, oil lines, coolant lines or paintwork.
  • Your engine bay suffers from heat soak after hard driving.
  • You are building a turbocharged road, track, drift or drag car.
  • You are fitting a new turbo, manifold, downpipe or wastegate setup.
  • You want to reduce radiant heat before protecting nearby lines with a heat sleeve.
  • You already have the turbo area apart, making installation easier.

Turbo Blanket vs Exhaust Wrap vs Heat Sleeve

A turbo blanket is best for containing heat at the turbocharger turbine housing. Exoracing exhaust wrap is better for manifolds, downpipes and exhaust pipework. Exoracing silicone fibreglass heat sleeve is better for protecting individual hoses, wiring, brake lines, oil lines and coolant lines near the heat source.

For the best heat management setup, control the heat at the source first, then protect the nearby components that are still exposed. View the full Exoracing heat management range for turbo blankets, exhaust wrap, heat sleeves, reflective tape and heat shields.

Purchase Includes

  • 1 x Exoracing Turbo Blanket V3
  • 2 x Stainless Steel Spring Fasteners
  • 1 x Exoracing Lifetime Warranty

Features

  • Contains turbo heat around the turbine housing
  • Helps reduce radiant engine bay heat
  • Helps protect hoses, wiring, paintwork, intake pipework and nearby fluid lines
  • V3 4-layer construction for improved heat retention and durability
  • Carbon or titanium weave exterior finish
  • Silica insulation wool centre layer
  • Stainless steel wire mesh interior layer
  • Stainless steel hook anchors for secure fitting
  • Supplied with 2 stainless steel spring fasteners
  • Available in T25, T3 and T4 sizes
  • Available in Titanium or Carbon exterior options
  • Working temperature up to 1200°C / 2100°F
  • Includes Exoracing lifetime warranty

Technical Specifications

Specification Details
Product Type Turbo blanket/turbo jacket
Version Exoracing Turbo Blanket V3
Exterior Material Carbon or titanium weave
Centre Material Silica insulation wool
Interior Material Stainless steel wire mesh
Turbo Size Options T25, T3 and T4
Colour Options Titanium and Carbon
Working Temperature 1200°C / 2100°F
Spring Material Stainless steel
Hook Anchor Material Stainless steel
Included Fasteners 2 stainless steel spring fasteners
Fitment Universal turbo blanket for compatible T25, T3 and T4 turbine housings
Warranty Exoracing Lifetime Warranty

Turbo Blanket Installation Guide

The Exoracing Turbo Blanket V3 is designed to fit over the turbine housing of the turbocharger and secure using the supplied stainless steel spring fasteners.

  1. Allow the turbocharger and engine bay to cool fully before installation.
  2. Wear gloves to help prevent skin irritation from heat-resistant fibres.
  3. Check the turbo area for oil, fuel, coolant or power steering fluid leaks before fitting.
  4. Remove any parts blocking access to the turbocharger turbine housing.
  5. Place the turbo blanket over the hot side of the turbo, not the compressor side.
  6. Make sure the blanket sits snugly around the turbine housing without covering actuator arms, wastegate linkages or moving parts.
  7. Secure the blanket using the supplied stainless steel spring fasteners between the anchor hooks.
  8. Check that the blanket is secure and does not slide around the turbine housing.
  9. After the first heat cycle, allow everything to cool fully and recheck the blanket and spring fasteners.

Installation difficulty: beginner-friendly if access is good. Some engine bays may require intake pipework, heat shields, or brackets to be moved for better access.

For the full step-by-step installation guide with photos, read our turbo blanket installation guide.

Turbo Blanket Test And Video Proof

We test our heat management products on real builds and in real use cases, because turbo heat protection is easier to trust when you can see it working.

  • Before and after turbo blanket test on a 550BHP RS4
  • Installing a Turbo Blanket V3 and comparing it against an older blanket after years of use
  • Extreme blowtorch thermal test on an Exoracing turbo blanket
  • Quick turbo blanket installation video showing how the blanket and springs fit
  • Exoracing Turbo Blanket V3 heat test and product review content

Open the Videos tab on this product page to watch the current turbo blanket test and installation videos.

Safety And Fitment Checks

  • Install only when the turbocharger is completely cold.
  • Check for oil, fuel, coolant and power steering fluid leaks before fitting.
  • Do not fit over damaged, leaking or unsafe turbo setups.
  • Do not cover actuator arms, wastegate linkages, compressor housings or moving parts.
  • Light smoke during the first few heat cycles can be normal as moisture and manufacturing residue burn off.
  • If smoke is heavy, smells like oil or fuel, or does not stop, switch the car off and inspect the area.
  • Recheck the blanket and spring fasteners after the first heat cycle.
  • Professional installation is recommended if access is poor or you are not confident working around turbo components.

Frequently Asked Questions

What does a turbo blanket do?

A turbo blanket contains heat around the turbine housing of the turbocharger. This helps reduce radiant engine bay heat and protect nearby components such as hoses, wiring, paintwork, intake pipework and fluid lines.

Which turbo blanket size do I need?

Choose T25, T3 or T4 based on your turbo frame size and turbine housing measurements. The blanket should sit snugly around the turbine housing without being stretched, forced or left loose.

Can I use this turbo blanket on a V-band turbo?

Yes, it can be used on many V-band turbo setups, but the fit may not hug the housing as tightly as a traditional flanged turbocharger. Use the sizing guide to choose the closest-fitting blanket for your application.

Can a turbo blanket reduce turbo lag?

A turbo blanket can help retain heat in the turbine housing, which can support more consistent turbo behaviour. The biggest benefit for most builds is better heat control and protection for nearby components.

Can a turbo blanket catch fire?

A turbo blanket should only be fitted to a clean, leak-free setup. The main fire risk comes from contamination such as oil, fuel, coolant, power steering fluid or other flammable liquids soaking into the blanket.

Will the blanket smoke after fitting?

Light smoke during the first few heat cycles can be normal as moisture and manufacturing residue burn off. If the smoke is heavy, smells like oil or fuel, or does not stop, switch the car off and inspect the turbo area.

Can I fit a turbo blanket with the turbo still on the car?

Yes, in many cases, the blanket can be fitted with the turbo still on the car. Access is the deciding factor. Some engine bays may need intake pipework, heat shields or brackets removed first.

Should I use a heat sleeve as well?

Yes, if hoses, wiring, brake lines, oil lines or coolant lines are still close to the turbo. A turbo blanket controls heat at the turbine housing, while a heat sleeve protects the nearby parts directly.

Official product information supplied by Exoracing.

Additional information
Weight 0,263 kg
Dimensions 23 × 4 × 26 cm
Choose Turbo Size

T25, T3, T4

Choose Exterior Finish

Titanium, Carbon

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Embossed Aluminium Heat Shield

Heat Protection
66,99 € – 107,19 €Price range: 66,99 € through 107,19 €
Embossed aluminium heat shield sheet for engine bays, firewalls, underbody panels and radiant exhaust heat protection. Choose 300mm or 600mm x 1000mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing External Wastegate Blanket Titanium or Carbon

Heat Protection
87,09 € – 107,19 €Price range: 87,09 € through 107,19 €
External wastegate blanket for 38, 44, 50 and 60mm wastegates. Titanium or carbon finish, 1200°C rated insulation and locking wire included.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Velcro Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Gold and silver Velcro heat sleeve for quick fit hose, wiring and AN line protection. Choose 15mm, 20mm, 25mm or 30mm ID. Rated to 250°C.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Heat Reflective Sheet 1m x 1.2m

Heat Protection
93,79 €
Protect panels, airboxes and bulkheads from radiant heat with Exoracing gold or silver heat reflective sheet. 1m x 1.2m, adhesive-backed, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mm

Heat Protection
227,79 €
Fabricate a custom manifold or downpipe heat shield with 0.1mm 304 stainless and 4mm insulation rated to 980°C continuously. Includes 2 logo plates.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Gold And Silver Sewn Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Exoracing sewn heat sleeve protects hoses, wiring and lines from engine bay heat. Gold or silver, 15mm-30mm ID, 0.5m length, 260°C direct heat rated.
Add to wishlist
Select options
Quick view
Sold out
Compare

Exoracing Titanium or Carbon Exhaust Wrap

Heat Protection
Titanium fibreglass exhaust wrap for manifolds, downpipes and hot exhaust sections. Choose 2.5cm or 5cm width and 5m, 10m or 15m lengths.
Add to wishlist
Read more
Quick view
Compare

Exoracing Gold and Silver Heat Reflective Tape

Heat Protection
40,19 € – 53,59 €Price range: 40,19 € through 53,59 €
Protect intake pipes, airboxes and panels from radiant heat with Exoracing gold or silver heat reflective tape. 5m or 10m rolls, adhesive, 450°C continuous.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account