• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Bolt Kits & Dress-Up Exoracing Titanium Intake Exhaust Manifold Nut and Stud Kit
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-Series
Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-Series 134,99 €
Back to products
Exoracing T3 Turbocharger Gasket
Exoracing T3 Turbocharger Gasket 22,99 €

Exoracing Titanium Intake Exhaust Manifold Nut and Stud Kit

18,99 € – 149,99 €Price range: 18,99 € through 149,99 €

Upgrade Honda intake or exhaust manifold hardware with Exoracing Grade 5 titanium M8x1.25 studs and flanged nuts. Options for K, B, D, F and H-Series.

Clear
Compare
Add to wishlist
SKU: EX-INT-EXH-TIT Category: Bolt Kits & Dress-Up Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Titanium Intake Or Exhaust Manifold Stud Kit

The Exoracing titanium intake and exhaust manifold nut and stud kit is designed to replace corroded, rounded or short OEM manifold hardware with Grade 5 titanium M8x1.25 studs and matching titanium flanged nuts.

It is ideal for Honda B-Series, D-Series, F-Series, H-Series and K-Series engines, especially when fitting aftermarket intake manifolds, thermal gaskets, exhaust manifolds, headers or turbo manifolds with thicker flanges.

  • Thread and size: M8x1.25×49 titanium stud
  • Material: Grade 5 titanium alloy stud and flanged nut
  • Install feature: 3mm hex key tip for easier fitting without damaging the threads
  • Best for: intake manifolds, exhaust manifolds, headers, turbo manifolds and thermal gasket installs
  • Compatibility: suitable for combined gasket and manifold depths up to 20mm
  • Included: selected quantity of titanium studs, matching flanged nuts and Exoracing lifetime warranty

Important: choose the option that matches your engine and manifold location. If you only need to replace one missing or damaged stud, choose the universal single option. Always confirm your original manifold thread is M8x1.25 before ordering.

Why Should You Use Titanium Intake Or Exhaust Studs?

Factory Honda intake and exhaust manifold bolts can become rusty, rounded, too short or weak after years of heat cycles and removal. This becomes even more obvious when fitting aftermarket manifolds, thermal intake gaskets or turbo manifolds, because the flange and gasket stack can be thicker than the original Honda setup.

These Exoracing studs are longer than many OEM manifold fasteners and are made from Grade 5 titanium for excellent corrosion resistance, strength-to-weight ratio and engine bay finish. They are a smart upgrade when you are already replacing a manifold, chasing an exhaust leak, fitting a thermal gasket, or refreshing a Honda engine bay.

Unlike normal bolts, studs also make manifold installation easier because the gasket and manifold can be located on the studs before the nuts are tightened. That is especially useful when installing heavier exhaust manifolds, awkward intake manifolds or turbo conversion manifolds.

For a cleaner matching engine bay, pair this kit with the Exoracing dress-up bolt and washer kit. On K-Series builds, it also works well alongside the Exoracing K20/K24 flush spark plug cover and other K-Series titanium hardware, such as the K-Series titanium alternator bolt kit.

Which Option Do I Need?

Option Engine/location Quantity included
Universal Single x 1 Replacement single M8x1.25 manifold stud and nut 1
K-Series Intake x 7 Honda K20/K24 intake manifold side 7
K-Series Exhaust x 5 Honda K20/K24 exhaust manifold/header side 5
K-Series Exhaust OEM Style x 5 Honda K20/K24 exhaust side when you want the OEM-style option 5
B-Series Intake x 10 Honda B-Series intake manifold side 10
B-Series Exhaust x 9 Honda B-Series exhaust manifold/header side 9
D-Series Intake x 10 Honda D-Series intake manifold side 10
D-Series Exhaust x 9 Honda D-Series exhaust manifold/header side 9
F-Series Intake x 10 Honda F-Series intake manifold side 10
F-Series Exhaust x 7 Honda F-Series exhaust manifold/header side 7
H-Series Intake x 10 Honda H-Series intake manifold side 10
H-Series Exhaust x 9 Honda H-Series exhaust manifold/header side 9

Purchase Includes

  • 1 x selected Exoracing titanium manifold nut and stud kit
  • Matching Grade 5 titanium flanged nuts for the selected option
  • 1 x Exoracing lifetime warranty

Features

  • Grade 5 titanium M8 stud and flanged nut
  • M8x1.25×49 stud thread, pitch and length
  • 3mm hex key tip for easier installation
  • Compatible with combined gasket and manifold depths up to 20mm
  • Suitable for intake and exhaust manifold applications
  • Useful with aftermarket manifolds, thermal gaskets, headers and turbo manifolds
  • Approximately 45% lighter than equivalent steel hardware
  • Excellent corrosion resistance compared with standard steel hardware
  • Titanium nut and stud weight: 11.8g
  • Includes Exoracing lifetime warranty

Exoracing Titanium Intake And Exhaust Stud Kit Installation Guide

  1. Confirm the original intake or exhaust manifold thread is M8x1.25.
  2. Remove the old studs or bolts carefully. If they are corroded, use the correct penetrating fluid and take your time to avoid damaging the cylinder head threads.
  3. Apply a small amount of suitable anti-seize to the titanium stud threads before installing them into an aluminium cylinder head.
  4. Install the Exoracing titanium studs using a 3mm Allen key or hex socket. Do not exceed 30Nm / 22lbft on the stud.
  5. Fit the gasket and manifold over the studs.
  6. Install the supplied titanium flanged nuts and tighten to the correct OEM/manufacturer torque setting for your engine and manifold.
  7. After a few heat cycles, recheck and retorque the studs and nuts if required.

For a full installation walkthrough, read our titanium intake or exhaust studs installation guide.

Technical Specifications

Material Grade 5 titanium alloy
Stud thread, pitch and length M8x1.25×49
Install tip 3mm hex key tip
Nut type Grade 5 titanium flanged hex nut
Titanium nut and stud weight 11.8g
Maximum stud install torque 30Nm / 22lbft
Compatible gasket/manifold depth Up to 20mm combined depth
Corrosion resistance Salt water and aggressive chemicals
Melting point 1604°C – 1660°C
Warranty Exoracing lifetime warranty

Frequently Asked Questions

Will these fit my Honda engine?

They are made for M8x1.25 manifold applications and are offered in Honda K-Series, B-Series, D-Series, F-Series and H-Series intake/exhaust quantities. Always confirm your original manifold thread and choose the option that matches your engine and manifold side.

Are these for intake or exhaust manifolds?

Both. Choose the intake or exhaust option for your engine. The quantity changes depending on the engine and manifold location.

Why are these longer than standard hardware?

Aftermarket intake manifolds, exhaust manifolds, thermal gaskets and turbo manifolds often use thicker flanges or gasket stacks than OEM parts. The M8x1.25×49 stud gives more usable length for those setups, with compatibility up to 20mm combined gasket and manifold depth.

Do I need anti-seize?

Yes. We recommend using suitable anti-seize when installing titanium hardware into cast aluminium cylinder heads to reduce the chance of galling.

What torque should I use?

Do not exceed 30Nm / 22lbft when installing the studs with the 3mm hex tip. Tighten the supplied nuts to the correct OEM/manufacturer torque setting for your engine and manifold.

Notes

  • Confirm your original manifold thread is M8x1.25 before ordering.
  • Do not exceed 30Nm / 22lbft when installing the studs.
  • Use anti-seize when installing titanium hardware into aluminium cylinder heads.
  • Retorque after a few heat cycles where required.
  • Professional installation is recommended if you are not confident in removing old manifold studs.

Official product information supplied by Exoracing.

Additional information
Weight 0,1 kg
Dimensions 26 × 5 × 26 cm
Engine / Manifold Side:

Universal Single x 1, K-Series Intake x 7, K-Series Exhaust x 5, K-Series Exhaust (OEM Style) x 5, B-Series Intake x 10, B-Series Exhaust x 9, D-Series Intake x 10, D-Series Exhaust x 9, F-Series Intake x 10, F-Series Exhaust x 7, H-Series Intake x 10, H-Series Exhaust x 9

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Titanium Sump Bolt Kit For Honda Civic B/D-Series

Bolt Kits & Dress-Up
124,99 €
Titanium sump bolt kit for Honda B-Series and D-Series sumps. Includes 10 Grade 5 titanium bolts, 9 nuts and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Titanium Water Pump Bolt Kit For Honda K-Series

Bolt Kits & Dress-Up
42,99 €
Why Use An Exoracing Titanium Water Pump Bolt Kit? As we all know, the OEM engine bolts, in this case,
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Titanium Alternator Bolt Kit K-Series K20 K24

Bolt Kits & Dress-Up
49,99 €
Why Use Exoracing Titanium K-Series Alternator Bolts? Over time, the old OEM alternator bolts become corroded or rounded after being
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Dress Up Bolt and Washer Kit M6x1.0

Bolt Kits & Dress-Up
22,99 €
Refresh your engine bay with Exoracing M6x20x1.0 dress-up bolts and anodised 6061 washers. Pack of 8, stainless bolts, multiple colours available.
Add to wishlist
Select options
Quick view
Compare

Exoracing Titanium Timing Chain Cover Bolt Kit For Honda K-Series

Bolt Kits & Dress-Up
89,99 €
Why Use A Titanium Timing Chain Cover Bolt Kit? As we all know, over time, the OEM Honda engine bolts
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Titanium Sump Bolt Kit For Honda K20 K24 K-Series

Bolt Kits & Dress-Up
134,99 €
Honda K20 K24 titanium sump bolt kit for compatible K-Series cast alloy sumps. Includes 18 Grade 5 titanium bolts to replace rusty OEM sump hardware.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Billet Aluminium Magnetic Sump Plug

Bolt Kits & Dress-Up
28,99 €
Choose The Right Magnetic Sump Plug For Your Oil Service The Exoracing billet aluminium magnetic sump plug is a simple
Add to wishlist
Select options
Quick view
Compare

Exoracing Titanium Water Pump Housing Bolt Kit K-Series K20 K24

Bolt Kits & Dress-Up
69,99 €
Why Use An Exoracing Titanium Bolt Kit? After owning a K-Series for a while, you will notice that they become
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account