• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Turbo Gaskets & Oil Fittings Exoracing AN10 Turbo Oil Drain Flange Kit
Exoracing T-Bolt Clamp Silicone Hose Coupler
Exoracing T-Bolt Clamp Silicone Hose Coupler 20,09 €
Back to products
Exoracing O2 Lambda Sensor Spacer M18x1.5 304 Stainless Steel
Exoracing O2 Lambda Sensor Spacer M18x1.5 304 Stainless Steel 26,79 €

Exoracing AN10 Turbo Oil Drain Flange Kit

26,79 €

Build a reliable AN10 turbo oil drain with Exoracing billet aluminium flange kit. Choose 40mm or 51mm bolt centres; includes gasket and M8 bolts.

Clear
Compare
Add to wishlist
SKU: EX-OIL-DRA Category: Turbo Gaskets & Oil Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right AN10 Turbo Oil Drain Flange For Your Turbocharger

The Exoracing AN10 turbo oil drain flange kit is designed to connect the oil return side of your turbocharger to an AN10 oil drain system. It is CNC machined from T6061 billet aluminium with an 8.5mm thick base, and includes the gasket and M8 bolts needed to mount the flange to compatible turbochargers.

  • Available bolt-hole centres: 40mm and 51mm
  • Fitting thread: AN10 oil drain fitting thread
  • Material: T6061 billet aluminium flange
  • Included: 1 AN10 turbo oil drain flange, 1 oil drain gasket, 2 M8x1.25×20 cap head bolts and Exoracing lifetime warranty
  • Common turbo use: aftermarket GT25, GT28, GT30 and GT35 style turbocharger setups where the bolt spacing matches

Important: measure the bolt-hole centre distance on the oil drain side of your turbo before ordering. Choose 40mm or 51mm to match your turbocharger, and make sure your oil drain line and fitting setup is AN10 compatible.

Why Use An Exoracing AN10 Turbo Oil Drain Flange?

A turbo oil drain needs to move oil away from the turbocharger reliably. If the flange is the wrong size, the gasket does not seal, or the drain line is poorly matched, the result can be oil leaks, smoking, poor drainage or messy rework once the turbo system is already installed.

This Exoracing AN10 drain flange gives you a clean way to build an AN10 turbo oil return setup. The billet aluminium flange is thick enough to resist distortion, the centre is threaded for an AN10 fitting, and the kit includes the gasket and M8 mounting bolts, so you are not hunting for basic hardware during the install.

This is a smart part to replace while the turbo, manifold or downpipe area is already apart. If you are refreshing the drain side, it is also worth checking the related Exoracing turbo oil feed and drain gaskets, Exoracing AN10 turbo oil return drain fitting and nearby heat protection such as the Exoracing turbo blanket or Exoracing exhaust wrap.

Which Bolt-Hole Centre Should I Choose?

Measure from the centre of one oil-drain mounting hole to the centre of the other mounting hole on your turbocharger. Do not measure from the outside edge of the holes, as this can give the wrong result.

Option Choose This If Check Before Ordering
40mm bolt-hole centres Your turbo oil drain mounting holes measure 40mm centre to centre. Confirm the bolt spacing and that your drain fitting is AN10.
51mm bolt-hole centres Your turbo oil drain mounting holes measure 51mm centre to centre. Confirm the bolt spacing and turbo drain face clearance.

Purchase Includes:

  • 1 x Exoracing AN10 turbo oil drain flange
  • 1 x Exoracing turbo oil drain gasket
  • 2 x Exoracing cap head M8x1.25×20 bolts
  • 1 x Exoracing lifetime warranty

Features:

  • CNC machined from T6061 billet aluminium
  • Centre hole threaded for AN10 oil drain fittings
  • Available in 40mm or 51mm bolt-hole centre options
  • 8.5mm base thickness helps reduce the risk of flange distortion
  • Includes oil drain gasket and M8 mounting bolts
  • Useful for many GT25, GT28, GT30 and GT35 style turbocharger setups when the bolt spacing matches
  • Designed to help build a clean, serviceable turbo oil return system
  • Includes Exoracing lifetime warranty

Exoracing AN10 Turbo Oil Drain Flange Installation Guide:

Oil drain fitment matters because the return side of the turbo needs a clear, reliable path back to the sump or oil return point. If you are unsure about turbo oil drain routing, ask a professional to install it.

  1. Let the turbocharger and exhaust area cool fully before starting work.
  2. Drain the oil or prepare for oil spillage from the turbo oil return system.
  3. Measure the turbo oil drain bolt-hole centres and confirm whether you need the 40mm or 51mm flange.
  4. Remove the old oil drain flange, bolts and gasket from the turbocharger.
  5. Clean the turbo oil drain mating surface and remove any old gasket material.
  6. Place the new oil drain gasket between the turbo and the Exoracing AN10 flange.
  7. Install the supplied M8x1.25×20 cap head bolts and tighten to the turbo manufacturer’s specification.
  8. Connect your AN10 oil drain fitting and line, making sure the drain route falls smoothly without kinks or high spots.
  9. Refill the engine oil if required, start the engine, check for leaks, then recheck after a few heat cycles.

Technical Specifications:

Specification 40mm Oil Drain Flange Kit 51mm Oil Drain Flange Kit
Material T6061 billet aluminium T6061 billet aluminium
Kit Weight 54g 63g
Fitting Thread AN10 AN10
Bolt Thread, Length and Pitch M8x1.25×20 M8x1.25×20
Base Thickness 8.5mm 8.5mm
Height 28mm 28mm
Width 25mm 25mm
Length 58mm 70mm
Bolt-Hole Centre To Centre 40mm 51mm
Oil Drain Gasket Included Included
Warranty Exoracing lifetime warranty Exoracing lifetime warranty

Frequently Asked Questions

Will this oil drain flange fit my turbocharger?

It will fit turbochargers with a matching oil-drain bolt-hole centre distance and AN10 drain setup. Measure the centre-to-centre distance between the two drain mounting holes on your turbo and choose either the 40mm or 51mm option.

Does the kit include a gasket and bolts?

Yes. The kit includes the AN10 oil drain flange, oil drain gasket and 2 x M8x1.25×20 cap head bolts.

Does this include the AN10 return fitting?

This listing includes the drain flange kit, gasket and bolts. If you need a matching fitting for your oil return line, see the Exoracing AN10 turbo oil return drain fitting.

Which turbos does it commonly suit?

It is commonly used on many aftermarket GT25, GT28, GT30 and GT35 style turbocharger setups, but you must measure your turbo oil drain bolt spacing before ordering.

Why is the oil drain route important?

The turbo oil drain should flow smoothly back to the sump or return point. Avoid kinks, tight bends or uphill sections because poor drainage can cause oil leaks or smoke.

Notes:

  • Measure your turbocharger oil drain bolt-hole centres before ordering.
  • Choose the 40mm or 51mm option to match your turbocharger.
  • Professional installation is recommended.
  • Recheck the drain flange for leaks after the first few heat cycles.

Official product information supplied by Exoracing.

Additional information
Weight 0,08 kg
Dimensions 20 × 2 × 27 cm
Bolt Hole Centre to Centre

40mm, 51mm

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing T4 Twinscroll Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T4 Twinscroll Turbo Gasket? We pride ourselves on delivering the best quality parts possible for your automotive
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T3 Turbocharger Gasket

Turbo Gaskets & Oil Fittings
20,09 €
Exoracing T3 turbocharger gasket for turbo to manifold flanges. Choose 304 stainless steel or aluminium composite. 85mm x 44mm bolt centres.
Add to wishlist
Select options
Quick view
Compare

Exoracing Turbo Oil Drain Gasket T25 T28

Turbo Gaskets & Oil Fittings
13,39 €
Why Use An Exoracing T25 Turbo Oil Drain Gasket? If you’ve ever experienced leaking from your turbocharger drain flange, it
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Turbo Boost Pressure Quick Tap Fitting Kit

Turbo Gaskets & Oil Fittings
26,79 €
Why Use An Exoracing Boost Quick Tap Kit If you’re running an aftermarket turbo, it will not always come with
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Oil Pressure Sensor Adapter

Turbo Gaskets & Oil Fittings
26,79 €
Add a turbo oil feed, oil pressure gauge or oil temperature sensor using 304 stainless adapters. Choose BSPT, NPT, M10x1.0 or 4-port thread layouts.
Add to wishlist
Select options
Quick view
Compare

Exoracing AN03 Turbo Oil Feed Restrictor 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing AN03 Turbo Oil Feed Restrictor 0.9mm.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing An10 Turbo Oil Return Drain Fitting Stainless Steel

Turbo Gaskets & Oil Fittings
46,89 €
Why Use An Exoracing An10 Turbo Return Drain Fitting? If you are currently doing a turbo conversion or making a
Add to wishlist
Add to cart
Quick view
Compare

Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm.
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account