• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Turbo Gaskets & Oil Fittings Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm
Exoracing Turbo Oil Feed And Drain Gaskets
Exoracing Turbo Oil Feed And Drain Gaskets 13,39 €
Back to products
Exoracing Adjustable AN Wrench Spanner AN03-AN16
Exoracing Adjustable AN Wrench Spanner AN03-AN16 66,99 €

Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm

26,79 €

Shop Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm.

Compare
Add to wishlist
SKU: EX-OIL-RES-2 Category: Turbo Gaskets & Oil Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Why Use An Exoracing AN04 Turbo Oil Feed Restrictor?

Maintaining a consistent flow of oil is crucial to ensuring the optimal performance of turbochargers. It is important to note that ball-bearing turbos have a different cartridge design than journal-bearing turbos, and consequently, they require a lower flow of oil.

This is where oil restrictors come into play. Without a restrictor, oil leakage through the seals is inevitable. Therefore, it is highly recommended that an oil restrictor be installed immediately to prevent further oil leakage.

Using an oil restrictor prevents oil leaks and enhances boost response by minimising oil windage in the bearing. To achieve maximum efficiency, the oil pressure entering a ball-bearing turbocharger should be between 40psi and 45psi (depending on the turbo). However, many engines have higher oil pressure, so you would use our 0.035″/0.9mm restrictors.

Our Exoracing turbo oil restrictor is designed to cater to most oil lines, which are AN04 and can be conveniently bolted directly to the turbo. With our oil restrictor, you can rest assured that your turbocharger will operate optimally without any oil leaks.

We also now offer an Exoracing lifetime warranty on our restrictor flanges. We are confident in our products and want to provide a risk-free buying experience.

Purchase Includes:

  • 1 x Exoracing AN04 Turbo Oil Feed Restrictor Flange
  • 1 x Exoracing Turbo Oil Feed Flange Gasket
  • 2 x Exoracing M8x20x1.25 Cap Head Bolts
  • 1 x Exoracing Lifetime Warranty

Features:

  • CNC Machined from 6061 Billet Aluminium
  • Male Thread for AN04 female oil feed lines
  • Restrictor size: 0.9mm/0.035″
  • Includes M8 x 1.25 bolts, oil feed gasket, oil feed, an4 restrictor flange
  • The Billet Aluminium Flange Features an 8mm base that will not distort or Leak
  • Universal turbo fitment with a 37mm bolt-hole spacing
  • Full kit weight: 44g

Exoracing AN04 Turbo Oil Restrictor Installation Guide:

Follow our easy step-by-step guide to get up and running quickly with your brand-new turbo oil restrictor. If you are unsure about any of the steps listed below or need advice on a restrictor, please get in touch with a professional who can advise further or help with installation.

  1. Firstly, before you do anything else, check that our turbo oil drain will fit your turbocharger. Then, drain the oil from the system to avoid as much spillage as possible.
  2. Next, remove any fittings on the turbo feed side, such as adapters screwed into the turbocharger etc.
  3. Place the gasket against the feed side while lining up the bolt holes, and then place the restrictor plate over the top.
  4. Screw in the M8 bolts and torque to factory specification.
  5. Screw the oil feed line back onto the AN04 fitting, and fill the system back up with oil.
  6. If this is your first turbocharger installation, prime the system before starting the car to ensure sufficient oil is inside.
  7. Run the car through a few heat cycles, then retorque the bolts.
  8. You are all done! If you have any good photos of the restrictor or your engine bay, please tag us on social media as we would love to see them! #exoracinguk

Technical Specifications:

Flange Material: 6061 Billet Aluminium
Gasket Material: 1mm Gasket Paper
Bolt Material: Steel
Kit Weight: 44g
Restrictor Size: 0.9mm/0.035″
Flange Length: 53mm
Flange Height: 21mm
Base Height: 8mm
Bole Hole Centre To Centre: 37mm
Warranty: Exoracing Lifetime Warranty

Notes:

  • Professional installation is always recommended.
  • Please ensure correct fitment before ordering (check the table above).
  • If installed incorrectly or to a turbocharger that doesn’t need a restrictor, you can cause turbo failure.

Official product information supplied by Exoracing.

Additional information
Weight 0,058 kg
Dimensions 20 × 2 × 27 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing Brass AN04 Turbo Oil Feed Restrictor 0.9mm.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Turbo Oil Drain Gasket T25 T28

Turbo Gaskets & Oil Fittings
13,39 €
Why Use An Exoracing T25 Turbo Oil Drain Gasket? If you’ve ever experienced leaking from your turbocharger drain flange, it
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T3 Twinscroll Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why Use Exoracing T3 Twinscroll Turbo Gasket? Here at Exoracing, we are dedicated to providing you with the best quality
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T3 Turbocharger Gasket

Turbo Gaskets & Oil Fittings
20,09 €
Exoracing T3 turbocharger gasket for turbo to manifold flanges. Choose 304 stainless steel or aluminium composite. 85mm x 44mm bolt centres.
Add to wishlist
Select options
Quick view
Compare

Exoracing Oil Pressure Sensor Adapter

Turbo Gaskets & Oil Fittings
26,79 €
Add a turbo oil feed, oil pressure gauge or oil temperature sensor using 304 stainless adapters. Choose BSPT, NPT, M10x1.0 or 4-port thread layouts.
Add to wishlist
Select options
Quick view
Compare

Exoracing Turbo Boost Pressure Quick Tap Fitting Kit

Turbo Gaskets & Oil Fittings
26,79 €
Why Use An Exoracing Boost Quick Tap Kit If you’re running an aftermarket turbo, it will not always come with
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T25 T28 Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T25/T28 Turbo Gasket? At Exoracing, we are devoted to providing you with parts that exceed expectations. With
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T4 Twinscroll Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T4 Twinscroll Turbo Gasket? We pride ourselves on delivering the best quality parts possible for your automotive
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account