• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Turbo Gaskets & Oil Fittings Exoracing An10 Turbo Oil Return Drain Fitting Stainless Steel
Exoracing Turbo Boost Pressure Quick Tap Fitting Kit
Exoracing Turbo Boost Pressure Quick Tap Fitting Kit 26,79 €
Back to products
Exoracing Turbo Oil Drain Gasket T25 T28
Exoracing Turbo Oil Drain Gasket T25 T28 13,39 €

Exoracing An10 Turbo Oil Return Drain Fitting Stainless Steel

46,89 €

Compare
Add to wishlist
SKU: EX-AN-10-SCR Category: Turbo Gaskets & Oil Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Why Use An Exoracing An10 Turbo Return Drain Fitting?

If you are currently doing a turbo conversion or making a catch can, etc., you would normally weld AN10 fittings for the drain, breather ports, etc., but we now have a solution which requires no welding.

The new approach is to drill a hole and tighten both nuts together, creating an incredibly fast way of creating an AN10 male port. Our Exoracing AN10 turbo drain fittings are machined from high-grade 304 stainless steel, so even if you want to weld them, you can!

Although welding remains the preferred method, this solution is highly beneficial when welding is not feasible. Furthermore, this adapter can also serve as a no-weld catch, enabling you to effortlessly create your own without needing a fabricator; all you need to own is a drill and 27mm sockets or spanners.

We also include two PTFE washers to ensure the stainless steel nuts do not bind or gall over time when tightened against any material.

Most turbo oil drains, catch cans, swirl pots, surge tanks, etc., are AN10, so this is the perfect addition or replacement for cross-threaded fittings.

We now also offer an Exoracing lifetime warranty on all our turbo fittings. We know you will love them as much as we do, and we want to provide a risk-free buying experience.

Purchase Includes:

  • 1 x Exoracing AN10 Turbo Return Drain Fitting
  • 1 x Exoracing AN10 Stainless Steel Nut
  • 2 x Exoracing AN10 22.5mm PTFE Washers
  • 1 x Exoracing Lifetime Warranty

Features:

  • CNC machined from 304 stainless steel
  • No welding required
  • PTFE washers to remove the risk of binding
  • Perfect for custom turbo oil drains, catch cans, swirl pots, surge tanks, etc
  • AN10 male fitting for the most universal fitment
  • The full kit weight is only 125g
  • Integrated nut for simple installation

Exoracing AN10 Turbo Return Drain Fitting Installation Guide:

To easily install your new Exoracing AN10 turbo drain fitting, follow our guide below. This guide has been written as if you are installing it in a sump, but if you are using it for anything else, you can skip the steps for removing and refitting the sump. If you are unsure of any steps, we recommend getting a professional to install it.

Tools Needed:

  • A drill with a 25mm drill bit
  • An AN spanner for the removal of the turbo drain line
  • 2 x 27mm sockets with ratchet or spanners
  • (optional) Sockets for the sump and sump plug bolts

Installation Guide:

  1. First, drain the oil from the car by removing the sump plug.
  2. Ensure the car is cold before removing the sump to reduce the risk of injury or burns.
  3. Mark the sump where you need to drill, ensuring you have a straight path from the turbo drain to remove the risk of kinks in the line.
  4. Remove the sump from the car and fully clean out the inside.
  5. Drill a 25mm hole in the centre of the mark you made previously, trying to catch as much of the swarf as possible from entering the sump.
  6. Before installing the fitting, make sure every bit of swarf has been removed from the sump. If you miss any, this could cause engine failure.
  7. Put a PTFE washer between the sump and fitting, and push the fitting through the sump with the tapered AN10 end on the outside.
  8. Put the second PTFE washer on the back of the fitting and install the threaded nut by hand.
  9. Tighten both nuts together using 2 x 27mm sockets or spanners, ensuring they are tight enough not to come loose by themselves.
  10. This step is optional, but if you would like to weld the nut from the inside, this would guarantee that the nut cannot come loose. (Your sump must be steel, not aluminium, and you would have to remove the PTFE washer from the inside.)
  11. Refit the sump to the car, refit the turbo oil drain line, and fill the engine with oil.
  12. Run the car through a few heat cycles and check for leaks. If there are no leaks, then you are good to go!
  13. Remember to tag us in any photos on social media, as we would love to see your builds! #exoracinguk

Technical Specifications:

Fitting Material: 304 Stainless Steel
Washer Material: Polytetrafluoroethylene (PTFE)
Kit Weight: 125g
Fitting Length: 51.5mm
Fitting Width: 27mm
Fitting Thread: AN10
Fitting Weight With Nut 121g
Socket Or Spanner Size: 27mm
Washer OD: 33mm
Washer ID: 22.5mm
Washer Width: 1.8mm
Washer Weight: 2g
Warranty: Exoracing Lifetime Warranty

Notes:

  • Professional installation is always recommended.
  • Please wash out the sump before installing it back onto the car to remove all metal shards and debris.

Official product information supplied by Exoracing.

Additional information
Weight 0,02 kg
Dimensions 20 × 3 × 27 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing T3 Turbocharger Gasket

Turbo Gaskets & Oil Fittings
20,09 €
Exoracing T3 turbocharger gasket for turbo to manifold flanges. Choose 304 stainless steel or aluminium composite. 85mm x 44mm bolt centres.
Add to wishlist
Select options
Quick view
Compare

Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing An04 Turbo Oil Feed Restrictor Flange 0.9mm.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing AN10 Turbo Oil Drain Flange Kit

Turbo Gaskets & Oil Fittings
26,79 €
Build a reliable AN10 turbo oil drain with Exoracing billet aluminium flange kit. Choose 40mm or 51mm bolt centres; includes gasket and M8 bolts.
Add to wishlist
Select options
Quick view
Compare

Exoracing AN03 Turbo Oil Feed Restrictor 0.9mm

Turbo Gaskets & Oil Fittings
26,79 €
Shop Exoracing AN03 Turbo Oil Feed Restrictor 0.9mm.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Turbo Boost Pressure Quick Tap Fitting Kit

Turbo Gaskets & Oil Fittings
26,79 €
Why Use An Exoracing Boost Quick Tap Kit If you’re running an aftermarket turbo, it will not always come with
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Oil Pressure Sensor Adapter

Turbo Gaskets & Oil Fittings
26,79 €
Add a turbo oil feed, oil pressure gauge or oil temperature sensor using 304 stainless adapters. Choose BSPT, NPT, M10x1.0 or 4-port thread layouts.
Add to wishlist
Select options
Quick view
Compare

Exoracing T25 T28 Turbo Gasket Stainless Steel

Turbo Gaskets & Oil Fittings
20,09 €
Why use Exoracing T25/T28 Turbo Gasket? At Exoracing, we are devoted to providing you with parts that exceed expectations. With
Add to wishlist
Add to cart
Quick view
Compare

Exoracing T4 Turbocharger Gasket

Turbo Gaskets & Oil Fittings
20,09 €
Why Use An Exoracing T4 Turbocharger Gasket? The worst thing is opening up your car on boost and realising you
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account