• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Heat Protection Exoracing Embossed Aluminium Heat Shield
Exoracing 2.5"/ 3.0"/ 3.5" Universal Air Filter
Exoracing 2.5"/ 3.0"/ 3.5" Universal Air Filter 46,89 €
Back to products
Exoracing Black Silicone Vacuum Hose 4/5/6mm
Exoracing Black Silicone Vacuum Hose 4/5/6mm 9,37 € – 93,79 €Price range: 9,37 € through 93,79 €

Exoracing Embossed Aluminium Heat Shield

66,99 € – 107,19 €Price range: 66,99 € through 107,19 €

Embossed aluminium heat shield sheet for engine bays, firewalls, underbody panels and radiant exhaust heat protection. Choose 300mm or 600mm x 1000mm.

Clear
Compare
Add to wishlist
SKU: EX-EMB-ALU Category: Heat Protection Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Aluminium Heat Shield For Your Engine Bay, Firewall Or Underbody

The Exoracing Embossed Aluminium Heat Shield is a rigid, formable radiant heat barrier designed to protect vulnerable areas from exhaust, turbo, manifold and downpipe heat.

It can be trimmed, shaped and mounted around engine bays, firewalls, bulkheads, transmission tunnels, underbody panels, intake areas, fuel tanks, wiring, hoses and other heat-sensitive parts.

  • Size options: choose 300mm x 1000mm for smaller focused areas, or 600mm x 1000mm for larger panels, firewalls, bulkheads and underbody sections.
  • Material: embossed aluminium heat shield sheet with about 0.5mm base thickness and about 2mm embossed depth.
  • Temperature rating: continuous resistance up to about 600°C and short burst resistance up to about 1100°C.
  • Included: 1 embossed aluminium heat shield sheet, 12 self-tapping screws and Exoracing lifetime warranty.
  • Best use: ideal for shielding panels, wiring, hoses, fuel lines, intakes, bulkheads and floor areas from radiant heat.

Important: this product is for radiant heat shielding, not direct flame contact. Mount it securely, keep it away from moving parts, and leave an air gap where possible for better heat control.

Which Size Should I Choose?

  • 300mm x 1000mm: choose this for smaller focused areas such as wiring protection, intake shielding, turbo side panels, brake line shielding, fuel line shielding or small custom heat shields.
  • 600mm x 1000mm: choose this for larger areas such as firewalls, bulkheads, transmission tunnels, floor pans, fuel tank shielding, underbody panels or wider custom coverage.

If you are unsure, measure the area you need to protect first and allow extra material for bends, mounting points and trimming. For large or awkward panels, the bigger sheet is usually the safer choice because it gives you more room to shape and cut the shield properly.

Why Should You Use An Embossed Aluminium Heat Shield?

Exhaust manifolds, turbochargers, downpipes and hot engine bay components can radiate a serious amount of heat into nearby panels, hoses, wiring, fuel lines, intakes and cabin areas. Left unmanaged, this can lead to heat soak, brittle wiring, melted hoses, uncomfortable cabin temperatures and avoidable reliability issues.

The Exoracing Embossed Aluminium Heat Shield creates a rigid reflective barrier between the heat source and the part you want to protect. Unlike soft wrap or sleeve products, it is designed to shield a whole area rather than cover one hose, pipe or wire.

The embossed structure helps the sheet hold shape, improves rigidity, and creates small air gap points that can help the shield perform better when mounted correctly.

This makes it a strong choice for road cars, track cars, drift cars, turbo conversions, K swaps, engine bay builds, underbody shielding and custom motorsport style heat protection.

When Should You Fit This Heat Shield?

  • You have exhaust heat close to wiring, hoses, brake lines, fuel lines or intake parts.
  • You are building a turbo setup and need to protect nearby panels or components.
  • You want to reduce radiant heat transfer into a firewall, bulkhead, floor pan or transmission tunnel.
  • You are fitting a downpipe, manifold, external wastegate or custom exhaust section close to sensitive parts.
  • You want a rigid barrier where heat tape, sleeve or exhaust wrap is not the right solution.
  • You already have the exhaust, turbo, manifold or interior trim removed, making heat shielding easier to fit now.

Heat Shield vs Heat Tape vs Sleeve vs Exhaust Wrap

This aluminium heat shield is best when you need to protect a wider panel or area from radiant heat. If you need to protect a single hose, cable or line, an Exoracing silicone fibreglass heat sleeve may be a better fit. If you need to reduce heat directly from an exhaust pipe or manifold, Exoracing exhaust wrap may be more suitable. For flat surfaces where an adhesive reflective barrier is easier to apply, view our gold and silver heat reflective sheet.

For the full range of products, view our heat management range.

Purchase Includes:

  • 1 x Exoracing Embossed Aluminium Heat Shield Sheet
  • 12 x Self-Tapping Screws
  • 1 x Exoracing Lifetime Warranty

Features:

  • Rigid radiant heat barrier for engine bay, firewall, bulkhead and underbody protection
  • Helps protect wiring, hoses, fuel lines, panels, intake parts and cabin areas from radiant heat
  • Embossed aluminium construction for strength, formability and corrosion resistance
  • Available in 300mm x 1000mm and 600mm x 1000mm sizes
  • Continuous temperature resistance up to about 600°C
  • Short burst temperature resistance up to about 1100°C
  • Can be trimmed, shaped and formed for custom installs
  • Embossed texture helps the shield retain shape after forming
  • Suitable for internal and external vehicle use when mounted correctly
  • Includes 12 self-tapping screws and Exoracing lifetime warranty

Technical Specifications:

Specification Details
Product Type Embossed aluminium heat shield sheet
Material Embossed aluminium
Available Sizes 300mm x 1000mm and 600mm x 1000mm
Base Thickness About 0.5mm
Embossed Depth About 2mm
Continuous Temperature Resistance About 600°C / 1100°F
Short Burst Temperature Resistance About 1100°C / 2000°F
Finish Raw aluminium with embossed texture
Formability Trim and shape for custom installations
Approximate Weight About 434g for 300mm x 1000mm, about 877g for 600mm x 1000mm
Included Fixings 12 self-tapping screws
Fitment Universal trim-to-fit radiant heat shielding
Warranty Exoracing Lifetime Warranty

Embossed Aluminium Heat Shield Installation Guide:

This heat shield can be cut, shaped and mounted to suit custom installs, but it must be fitted securely and safely.

  1. Identify the heat source and the component or panel you want to protect.
  2. Measure the area and mark the shield before cutting.
  3. Cut the shield to size using tin snips or suitable metal cutting tools.
  4. Wear gloves and eye protection, as cut aluminium edges can be sharp.
  5. Shape the shield by hand or with light tools to match the area being protected.
  6. Test fit the shield and check clearance around moving parts, steering parts, belts, driveshafts, suspension and exhaust movement.
  7. Mount the shield using the included self-tapping screws, rivets, clamps, brackets or suitable thermal standoffs.
  8. Where possible, leave an air gap between the heat shield and the protected surface for better radiant heat control.
  9. After fitting, run the vehicle and recheck that the shield is secure once everything has cooled down.

Installation difficulty: moderate DIY item. Professional installation is recommended if cutting, shaping or mounting near critical vehicle parts.

Frequently Asked Questions

What areas can this aluminium heat shield protect?

It can be used to protect engine bay panels, firewalls, bulkheads, floor pans, transmission tunnels, underbody areas, fuel tanks, wiring looms, hoses, fuel lines, brake lines, intake areas and other parts exposed to radiant heat.

Which size should I choose?

Choose 300mm x 1000mm for smaller focused areas and 600mm x 1000mm for larger panels, firewalls, bulkheads, underbody sections or custom shielding jobs where extra material is useful.

Can I cut and bend the heat shield?

Yes. It can be trimmed and shaped for custom installs. Use suitable cutting tools, wear gloves and eye protection, and take care with sharp edges after cutting.

Does this replace exhaust wrap or heat sleeve?

No. It solves a different problem. This heat shield protects wider areas and panels from radiant heat. Exhaust wrap is used directly on exhaust parts, and heat sleeve is used around hoses, wiring and lines.

Should I leave an air gap behind the heat shield?

Yes, where possible. A small air gap between the shield and the protected surface can improve radiant heat control and stop the shield from sitting directly against the part you are trying to protect.

Can this be used inside the car?

Yes, it can be used inside the vehicle on areas such as floor pans, firewalls or transmission tunnels, provided it is mounted securely and sharp edges are managed safely.

Is this suitable for direct flame contact?

No. This product is designed for radiant heat shielding, not direct flame contact.

What comes in the box?

You receive 1 Exoracing Embossed Aluminium Heat Shield Sheet, 12 self-tapping screws and Exoracing lifetime warranty.

Notes:

  • This product is designed for radiant heat shielding, not direct flame contact.
  • Always wear gloves and eye protection when cutting or shaping the shield.
  • Cut edges can be sharp and should be handled carefully.
  • Mount securely and keep clear of moving parts, belts, steering components, suspension, driveshafts and exhaust movement.
  • Leave an air gap where possible for better heat control.
  • Check fixings after the first heat cycle and again after road or track use.
  • For very high heat areas, combine with other Exoracing heat management products where suitable.
  • Professional installation is recommended if you are not confident cutting, shaping or mounting heat shielding.

Official product information supplied by Exoracing.

Additional information
Weight 0,474 kg
Choose Sheet Size

300mm x 1000mm, 600mm x 1000mm

Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Sold out
Compare

Exoracing Titanium or Carbon Exhaust Wrap

Heat Protection
Titanium fibreglass exhaust wrap for manifolds, downpipes and hot exhaust sections. Choose 2.5cm or 5cm width and 5m, 10m or 15m lengths.
Add to wishlist
Read more
Quick view
Compare

Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mm

Heat Protection
227,79 €
Fabricate a custom manifold or downpipe heat shield with 0.1mm 304 stainless and 4mm insulation rated to 980°C continuously. Includes 2 logo plates.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Heat Reflective Tape Installation Kit

Heat Protection
16,07 €
Install heat reflective tape and sheet with a cleaner finish. Includes Exoracing microfibre cloth, felt edge squeegee, sticker and lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing Gold and Silver Heat Reflective Tape

Heat Protection
40,19 € – 53,59 €Price range: 40,19 € through 53,59 €
Protect intake pipes, airboxes and panels from radiant heat with Exoracing gold or silver heat reflective tape. 5m or 10m rolls, adhesive, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Heat Reflective Sheet 1m x 1.2m

Heat Protection
93,79 €
Protect panels, airboxes and bulkheads from radiant heat with Exoracing gold or silver heat reflective sheet. 1m x 1.2m, adhesive-backed, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5m

Heat Protection
20,09 € – 29,47 €Price range: 20,09 € through 29,47 €
Protect hoses, wiring and lines from engine bay heat with Exoracing silicone fibreglass heat sleeve. 260°C continuous, 1200°C short, sizes 8mm-30mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold And Silver Sewn Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Exoracing sewn heat sleeve protects hoses, wiring and lines from engine bay heat. Gold or silver, 15mm-30mm ID, 0.5m length, 260°C direct heat rated.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold and Silver Velcro Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Gold and silver Velcro heat sleeve for quick fit hose, wiring and AN line protection. Choose 15mm, 20mm, 25mm or 30mm ID. Rated to 250°C.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account