• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Exhaust O2 Sensor Fittings Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless Steel
Exoracing Oil Pressure Sensor Adapter
Exoracing Oil Pressure Sensor Adapter 26,79 €
Back to products
Exoracing T3 Twinscroll Turbo Gasket Stainless Steel
Exoracing T3 Twinscroll Turbo Gasket Stainless Steel 20,09 €

Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless Steel

26,79 €

Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless Steel. Add a wideband or lambda port to stainless exhausts; drill 22-23mm hole.

Compare
Add to wishlist
SKU: EX-02-WELD Category: O2 Sensor Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right Weld-In O2 Lambda Sensor Nut For Your Exhaust

The Exoracing O2 lambda sensor adapter weld-in nut is designed to add an M18x1.5 sensor port to stainless exhaust pipework. It is useful when fitting a wideband sensor, adding an extra lambda sensor position for tuning, replacing a damaged sensor boss, or building a custom exhaust, downpipe or turbo setup that needs a clean sensor mounting point.

  • Thread: M18x1.5, the common thread used by many narrowband and wideband oxygen sensors
  • Material: 304 stainless steel
  • Install type: weld-in sensor nut with machined collar
  • Hole size guidance: drill a 22mm or 23mm hole before welding
  • Included: 1 lambda sensor adapter nut and Exoracing lifetime warranty

Important: this part must be welded into the exhaust. Confirm your sensor thread is M18x1.5, check the sensor angle/location required by your wideband or lambda sensor manufacturer, and use a professional welder if you are not confident fabricating stainless exhaust parts.

Why Do You Need A Weld-In Lambda Sensor Nut?

Most OEM and aftermarket exhaust systems only have the sensor ports needed for the original setup. That can become a problem when you add a wideband for tuning, build a turbo conversion, change the downpipe, or need to move the lambda sensor into a better position.

A weld-in lambda sensor nut lets you add a proper threaded port exactly where it is needed. The Exoracing adapter is machined from 304 stainless steel and uses the common M18x1.5 oxygen sensor thread, making it suitable for many narrowband and wideband sensor applications where the sensor also uses M18x1.5.

The machined collar helps the adapter sit neatly in the drilled hole before welding. Once installed correctly, it gives the sensor a strong, serviceable threaded mounting point in the exhaust. If you are building or refreshing an exhaust sensor setup, it is also worth checking the Exoracing O2 lambda sensor spacer, Exoracing heat reflective tape for nearby heat protection, and Exoracing stainless steel V-band clamps for serviceable exhaust fabrication joints.

Fitment And Compatibility Guide

Check What To Confirm
Sensor thread Your oxygen, lambda or wideband sensor must use an M18x1.5 thread.
Exhaust material This adapter is 304 stainless steel and is best suited to stainless exhaust fabrication.
Hole size Drill a 22mm or 23mm hole so the adapter can sit correctly before welding.
Sensor angle Follow your sensor manufacturer’s guidance. Wideband sensors often need a specific angle to avoid moisture damage and poor readings.
Access Leave enough space to install, remove and service the sensor after welding.

When Should You Use This Adapter?

Use Case Why It Helps
Wideband install Adds a dedicated M18x1.5 sensor port for tuning and air-fuel ratio monitoring.
Turbo conversion Allows you to position the sensor correctly in new downpipe or exhaust pipework.
Custom exhaust fabrication Gives the exhaust fabricator a clean weld-in sensor boss.
Damaged sensor port repair Can replace a damaged or badly positioned lambda sensor boss during exhaust repair.

Purchase Includes:

  • 1 x Exoracing O2 lambda sensor adapter weld-in nut
  • 1 x Exoracing lifetime warranty

Features:

  • Adds an extra O2, lambda or wideband sensor port when needed
  • M18x1.5 thread for common narrowband and wideband oxygen sensors
  • Machined from 304 stainless steel
  • Weld-in design for exhaust, downpipe and turbo fabrication
  • Machined collar helps locate the adapter during installation
  • Can be used to replace a damaged sensor boss when correctly fabricated
  • Compact 13mm height and 20g weight
  • Includes Exoracing lifetime warranty

Exoracing O2 Lambda Sensor Weld-In Nut Installation Guide:

Welding and exhaust modification are required. If you are not confident welding stainless exhaust parts, ask a professional fabricator to install the adapter.

  1. Remove the exhaust section, downpipe or pipework you plan to modify.
  2. Choose the sensor location carefully, leaving enough room to fit and remove the sensor later.
  3. Check your wideband or lambda sensor manufacturer’s recommended sensor angle and position before drilling.
  4. Clean the exhaust surface where the adapter will be welded.
  5. Mark the hole position and drill a 22mm or 23mm hole.
  6. Place the adapter into the hole with the machined collar sitting on the outside of the pipework.
  7. Weld around the adapter fully and allow it to cool.
  8. Once cool, test-fit the M18x1.5 sensor and check that the threads are clean before final installation.

Technical Specifications:

Specification Details
Material 304 stainless steel
Thread M18x1.5
Height 13mm
Outer Diameter 22mm
Outer Diameter Including Collar 24.5mm
Collar Height 7mm
Recommended Drill Hole 22mm or 23mm
Weight 20g
Warranty Exoracing lifetime warranty

Frequently Asked Questions

What thread is this lambda sensor adapter?

This weld-in adapter uses an M18x1.5 thread, which is commonly used by many O2, lambda and wideband sensors. Check your sensor thread before ordering.

What size hole do I need to drill?

Drill a 22mm or 23mm hole, then sit the adapter into the hole using the collar before welding.

Can this be used for a wideband sensor?

Yes, if your wideband sensor uses an M18x1.5 thread. Always follow the wideband manufacturer’s recommended sensor angle and position.

Does this need welding?

Yes. This is a weld-in exhaust fabrication part and should be welded into the pipework by a competent welder or fabricator.

Can I use this to replace a damaged sensor port?

Yes, it can be used as part of a repair or fabrication job if the damaged section is removed or prepared correctly and the new adapter is welded in properly.

Notes:

  • Professional welding is recommended.
  • Confirm your sensor thread is M18x1.5 before ordering.
  • Check sensor angle and location before drilling.
  • Test-fit the sensor after welding and before final exhaust installation.

Official product information supplied by Exoracing.

Additional information
Weight 0,07 kg
Dimensions 10 × 2 × 20 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing O2 Sensor Plug M18x1.5 304 Stainless Steel

O2 Sensor Fittings
26,79 €
M18x1.5 O2 sensor plug for blocking unused lambda ports. CNC machined from 304 stainless steel with 19mm head and Exoracing lifetime warranty.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing O2 Lambda Sensor Spacer M18x1.5 304 Stainless Steel

O2 Sensor Fittings
26,79 €
Shop the Exoracing M18x1.5 O2 lambda sensor spacer in 304 stainless steel, made for durable exhaust sensor installation.
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account