• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Engine & Gearbox Mounts
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Exhaust O2 Sensor Fittings Exoracing O2 Sensor Plug M18x1.5 304 Stainless Steel
Exoracing Turbo Downpipe Gasket 5-Bolt T25 Stainless Steel
Exoracing Turbo Downpipe Gasket 5-Bolt T25 Stainless Steel 20,09 €
Back to products
Exoracing Oil Pressure Sensor Adapter
Exoracing Oil Pressure Sensor Adapter 26,79 €

Exoracing O2 Sensor Plug M18x1.5 304 Stainless Steel

26,79 €

M18x1.5 O2 sensor plug for blocking unused lambda ports. CNC machined from 304 stainless steel with 19mm head and Exoracing lifetime warranty.

Compare
Add to wishlist
SKU: EX-02-BUN Category: O2 Sensor Fittings Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Choose The Right O2 Sensor Plug For Your Exhaust System

The Exoracing O2 sensor plug is designed to block off an unused lambda sensor or wideband sensor port in an exhaust system. It is ideal when you have an aftermarket exhaust, decat pipe, downpipe, test pipe, manifold or custom exhaust section with an unused M18x1.5 sensor boss.

  • Thread size: M18x1.5, the common thread used on many narrowband and wideband lambda sensor ports.
  • Material: CNC-machined 304 stainless steel for corrosion resistance and long-term exhaust use.
  • Included: 1 Exoracing O2 sensor plug and Exoracing lifetime warranty.
  • Install note: removable threaded plug, so the lambda port can be used again later if needed.

Important: Check your exhaust sensor boss thread before ordering. This plug is for M18x1.5 threaded lambda/O2 sensor ports.

Which Option Should I Choose?

  • M18x1.5 lambda/O2 port: choose this plug if your exhaust boss uses the common M18x1.5 sensor thread.
  • Aftermarket exhausts: use this to block an unused sensor port on a downpipe, decat, test pipe, manifold or custom exhaust section.
  • Unsure thread size: measure the existing sensor thread or check the exhaust manufacturer’s specifications before ordering.

Why Should You Use The Exoracing O2 Sensor Plug?

Many OEM and aftermarket exhaust systems have one or more lambda sensor ports. If one of those ports is not being used, it needs to be sealed properly to stop exhaust leaks, noise, false readings and unwanted fumes.

The Exoracing O2 sensor plug gives you a clean, removable way to block an unused M18x1.5 lambda port without welding the boss shut.

Because it is CNC machined from 304 stainless steel, it is suitable for harsh exhaust environments where heat, moisture and corrosion are common problems.

This is a useful add-on for road, track, turbo, wideband, decat, custom exhaust and fabrication jobs where you need to blank off an unused O2 sensor port properly.

Purchase Includes:

  • 1 x Exoracing O2 Sensor Plug M18x1.5 304 Stainless Steel
  • 1 x Exoracing Lifetime Warranty

Features:

  • Blocks off unused lambda and O2 sensor ports
  • M18x1.5 thread suits many universal lambda sensor bosses
  • CNC machined from 304 stainless steel
  • Removable design allows the sensor port to be reused later
  • 19mm hex head works with a common socket size
  • Useful for aftermarket exhausts, decats, downpipes, test pipes and custom fabrication
  • Helps prevent exhaust leaks from unused sensor ports
  • Includes Exoracing lifetime warranty

Exoracing O2 Sensor Plug M18x1.5 Installation Guide:

This is a simple threaded installation, but the exhaust must be cold before fitting.

  1. Allow the exhaust system to cool fully before starting work.
  2. Confirm the lambda/O2 sensor boss uses an M18x1.5 thread.
  3. Check that the port threads are clean and free from damage.
  4. Screw the O2 sensor plug into the boss by hand first to avoid cross-threading.
  5. Use a 19mm socket to tighten the plug.
  6. Torque to 40 to 60Nm where access allows.
  7. Start the vehicle and check the area for exhaust leaks once fitted.

Installation difficulty: simple service item, but professional installation is recommended if access is difficult or the exhaust threads are damaged.

Reason to buy now: fit this while the exhaust, downpipe, decat or manifold is already off the car, as access is usually much easier.

Technical Specifications:

Specification Details
Product Type O2 sensor plug/lambda sensor blanking plug
Material 304 stainless steel
Thread Size M18x1.5
Length 20mm
Width 22mm
Weight 40g
Socket Size 19mm
Torque Setting 40 to 60Nm
Application Unused M18x1.5 lambda/O2 sensor ports
Warranty Exoracing Lifetime Warranty

Recommended With This Product:

  • Exoracing O2 Lambda Sensor Bung M18x1.5 304 Stainless Steel if you need to add a new lambda sensor port to an exhaust system.
  • Exoracing Titanium Exhaust Wrap if the exhaust section is already removed, and you want to reduce radiant heat.
  • Exoracing Stainless Steel Cable Ties if you are fitting exhaust wrap at the same time.

Frequently Asked Questions

What does this O2 sensor plug do?

It blocks off an unused lambda or O2 sensor port in an exhaust system, helping seal the port and prevent exhaust leaks.

What thread size is this plug?

This plug uses an M18x1.5 thread, which is commonly used for narrowband and wideband lambda sensor ports.

Will this fit my exhaust?

It will fit if your exhaust sensor boss is M18x1.5. Always confirm the thread before ordering, especially on custom exhausts or imported exhaust systems.

Can I remove it later?

Yes. Because this is a threaded plug, it can be removed later if you need to install a lambda sensor or a wideband sensor into the port.

What socket size do I need?

The plug uses a 19mm socket.

What torque should I use?

Torque to 40 to 60Nm where access allows. Do not force the plug if the threads are damaged or dirty.

Should I use this in a stainless steel boss?

Ideally, this stainless steel O2 sensor plug should be used in a stainless steel boss for best long-term compatibility.

Notes:

  • Designed for M18x1.5 lambda/O2 sensor ports only.
  • Confirm the boss’s thread before ordering.
  • Install by hand first to avoid cross-threading.
  • Use on a cold exhaust only.
  • Torque to 40 to 60Nm where access allows.
  • Ideally used with a stainless steel boss.
  • Professional installation is always recommended.

Official product information supplied by Exoracing.

Additional information
Weight 0,04 kg
Dimensions 10 × 2 × 20 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless Steel

O2 Sensor Fittings
26,79 €
Exoracing O2 Lambda Sensor Adapter Weld In Nut M18x1.5 Stainless Steel. Add a wideband or lambda port to stainless exhausts; drill 22-23mm hole.
Add to wishlist
Add to cart
Quick view
Compare

Exoracing O2 Lambda Sensor Spacer M18x1.5 304 Stainless Steel

O2 Sensor Fittings
26,79 €
Shop the Exoracing M18x1.5 O2 lambda sensor spacer in 304 stainless steel, made for durable exhaust sensor installation.
Add to wishlist
Add to cart
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Engine & Gearbox Mounts
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account