• English
KOSHIRGARAGE.COM shop
  • Contact Us
  • About KoshirGarage
Select category
  • Select category
  • Accessories
    • Merchandise
    • Tools
  • Electronics
    • Haltech
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
        • Nexus R5
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Koshirgarage products
    • Carbon parts
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Tyres
    • Nankang
      • AR-1
      • CR-S
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
Login / Register
Wishlist
0 Compare
0 items 0,00 €
Menu
0 items 0,00 €
  • Home
  • SHOP BY CATEGORY
    • Suspension
      • Bushings
      • Control Arms
      • Other Suspension Parts
      • Replacement Parts
      • Roll Centre Ball Joints
      • Roll Centre Tie Rod Ends
      • Stabilizer Links
      • Strut Bars & Braces
      • Super Angle Tie Rods
      • Sway Bars
    • Engine
      • Air Intake & Breathers
      • Bolt Kits & Dress-Up
      • Engine & Gearbox Mounts
      • Heat Protection
      • Hoses & Clamps
      • Turbo Gaskets & Oil Fittings
    • Wheels
      • Hubs & Lug Conversions
      • Wheel Lug Nuts
      • Wheel Studs
    • Tyres
      • Nankang AR-1
      • Nankang CR-S
    • Interior
      • Seat Mounts & Rails
      • Seats
    • Electronics
      • Accessories
      • CAN Keypads
      • Digital Dashboards
      • ECU + Universal Wiring Kits
      • Ignition
      • Injectors
      • Plug and Play ECUs & Harnesses
      • Power Distribution (PDM)
      • Sensors
      • Throttle Bodies
      • Transmission Control
      • Wiring & Harnesses
    • Accessories
      • Merchandise
      • Tools
    • Exhaust
      • Clamps & Mounts
      • Gaskets & Flanges
      • O2 Sensor Fittings
    • Koshirgarage products
      • Carbon parts
  • BRANDS
    • Koshir Garage
    • Hardrace
    • Haltech
    • Recaro
    • Nankang
    • Exoracing
  • Blog
  • Contact us
  • Terms and conditions
Click to enlarge
Home Engine Heat Protection Exoracing Heat Reflective Tape Installation Kit
Exoracing 10pc Heat Shrink Tags 3:1
Exoracing 10pc Heat Shrink Tags 3:1 14,73 € – 18,75 €Price range: 14,73 € through 18,75 €
Back to products
Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mm
Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mm 227,79 €

Exoracing Heat Reflective Tape Installation Kit

16,07 €

Install heat reflective tape and sheet with a cleaner finish. Includes Exoracing microfibre cloth, felt edge squeegee, sticker and lifetime warranty.

Compare
Add to wishlist
SKU: EX-REF-INS-BUN Category: Heat Protection Brand: Exoracing
Share:
  • Description
  • Additional information
  • Shipping & Delivery
Description

Install Heat Reflective Tape And Sheet With A Cleaner Finish

The Exoracing Heat Reflective Tape Installation Kit is designed to help you prepare, clean and apply heat reflective tape or heat reflective sheet properly. A clean surface and smooth application are both important for strong adhesion, fewer bubbles and a neater finished result.

  • Best use: ideal for installing heat reflective tape, reflective sheet, adhesive heat barrier and other smooth-backed materials.
  • Included tools: Exoracing microfibre cloth and felt-edge squeegee for surface preparation and application.
  • Cleaner install: helps remove dust, grease and fingerprints before fitting reflective heat products.
  • Bubble control: the felt-edge squeegee helps press the material down evenly and push out trapped air.
  • Included: 1 microfibre cloth, 1 felt-edge squeegee, 1 Exoracing sticker and Exoracing lifetime warranty.

Important: apply reflective tape or sheet only to a cool, clean and dry surface. For best adhesion, remove oil, grease, wax, silicone dressing and dust before fitting.

Why Use The Exoracing Heat Reflective Tape Installation Kit?

Heat reflective tape and reflective sheet work best when they are applied to a properly prepared surface. If the surface is dirty, greasy or dusty, the adhesive may not bond as well, and the final finish can look poor.

The Exoracing microfibre cloth helps clean the surface before fitting, while the felt edge squeegee helps press the tape or sheet down smoothly without scratching the face of the material.

This kit is especially useful when fitting reflective tape around intake pipes, airboxes, bulkheads, engine bay panels, heat shields, plastic trims, aluminium panels and other smooth surfaces near heat sources.

It is a simple add-on that helps reduce wasted reflective tape, messy edges, trapped air and poor adhesion.

When Should You Use This Kit?

  • You are fitting heat reflective tape to intake pipework, airboxes or engine bay panels.
  • You are installing a gold or silver heat reflective sheet.
  • You want a cleaner finish with fewer bubbles and creases.
  • You are applying reflective material to painted, polished, anodised, aluminium, carbon, plastic or glass surfaces.
  • You are preparing a surface that may have fingerprints, oil, dust, wax or light dirt on it.
  • You want the install to look neater the first time, instead of wasting tape.

Best Products To Use This Kit With

This kit is designed to work with adhesive-backed heat reflective products. It pairs especially well with Exoracing gold and silver heat reflective tape and Exoracing gold and silver heat reflective sheet.

For hotter areas where an adhesive surface product is not suitable, view the full Exoracing heat management range to compare heat sleeves, exhaust wrap, turbo blankets and heat shields.

Purchase Includes

  • 1 x Exoracing Microfibre Cloth
  • 1 x Exoracing Squeegee With Felt Edge
  • 1 x Exoracing Sticker
  • 1 x Exoracing Lifetime Warranty

Features

  • Helps prepare surfaces before applying reflective heat products
  • Helps reduce bubbles, creases and poor adhesion
  • Microfibre cloth removes dust, fingerprints and light surface contamination
  • Felt-edge squeegee helps smooth adhesive-backed materials into place
  • Safe for use on aluminium, carbon, painted metal, plastics and glass
  • Compact size for toolboxes, workshops, track days and garage use
  • Reusable and easy to clean
  • Designed to work with Exoracing reflective tape and reflective sheet
  • Includes Exoracing lifetime warranty

Technical Specifications

Specification Details
Product Type Heat reflective tape and sheet installation kit
Included Cloth Exoracing microfibre cloth
Cloth Material 80 per cent polyester and 20 per cent polyamide blend
Cloth Size 28cm x 28cm
Cloth Density 300gsm
Included Squeegee Injection moulded plastic squeegee with bonded felt edge
Squeegee Size 10cm x 7cm x 6.7cm depth at the ridged section
Compatibility Safe for aluminium, carbon, painted metal, plastics and glass
Best Uses Reflective tape, reflective sheet, adhesive heat barrier and smooth-backed materials
Included Extras Exoracing sticker
Warranty Exoracing Lifetime Warranty

Heat Reflective Tape Installation Guide

This kit helps prepare the surface and apply adhesive-backed reflective heat products with a cleaner finish.

  1. Make sure the surface is cool, dry and safe to work on.
  2. Use the microfibre cloth to remove dust, dirt, fingerprints and loose debris.
  3. For better adhesion, use a suitable residue free surface cleaner or isopropyl alcohol, then allow the area to dry fully.
  4. Measure and cut the reflective tape or sheet to the required size.
  5. Test fit the piece before removing the backing paper.
  6. Peel back a small section of the adhesive liner and position the first edge carefully.
  7. Use the felt-edge squeegee to press the material down from the centre outwards.
  8. Continue peeling the liner back while smoothing the tape or sheet into place.
  9. Run the squeegee over the surface again to improve contact and remove trapped air.
  10. Wipe the finished surface with the microfibre cloth if needed.

Installation difficulty: simple DIY item.

For the full step-by-step version with images and video, read our heat reflective tape installation guide.

Frequently Asked Questions

Do I need this kit to install heat reflective tape?

You can install heat reflective tape without it, but this kit makes the job cleaner and easier. It helps prepare the surface properly and smooths the tape down with fewer bubbles and creases.

What does the microfibre cloth do?

The microfibre cloth helps remove dust, dirt, fingerprints and light surface contamination before the tape or sheet is applied. A cleaner surface gives the adhesive a better chance to bond properly.

What does the felt-edge squeegee do?

The felt edge squeegee helps press reflective tape or sheet down evenly while reducing the risk of scratches, trapped air, creases and messy edges.

Can I use this kit with a reflective sheet as well as tape?

Yes. This kit is suitable for adhesive-backed reflective tape and reflective sheet.

Can I use it on painted or polished surfaces?

Yes, the cloth and felt edge squeegee are suitable for painted, polished, anodised, aluminium, carbon, plastic and glass surfaces when used carefully.

Should I use alcohol cleaner before applying tape?

A residue free surface cleaner or isopropyl alcohol can help remove oil, grease and wax before fitting. The surface must be fully dry before applying adhesive-backed heat reflective products.

Notes

  • Always apply adhesive-backed reflective products to a cool, clean and dry surface.
  • Remove oil, grease, wax, silicone dressing and dust before fitting.
  • Do not use cleaners that leave residue behind.
  • Test fit the tape or sheet before removing the backing paper.
  • Apply steady pressure with the felt-edge squeegee for better contact.
  • This kit is for installation only. It does not add heat protection by itself.

Official product information supplied by Exoracing.

Additional information
Weight 0,056 kg
Dimensions 20 × 4 × 10 cm
Shipping & Delivery

Shipping Policy
  • Local Pickup Available – Collect in-store/workshop at no extra cost.
  • Slovenia Delivery – Contact us for a tailored quote based on your postcode and order size.
  • International Shipping – Available worldwide. Rates calculated at checkout or upon request.
  • Processing Time – Orders are typically processed and dispatched within 2–5 business days. Depends on in stock .
  • Packaging – All parts are securely packed to prevent damage in transit.
  • Contact Us – For delivery pricing, tracking updates, or special shipping requests: DM us or email info@koshirgarage.com
Prices exclude VAT where applicable.
Shipping costs are non-refundable.

Related products

Compare

Exoracing Gold and Silver Heat Reflective Sheet 1m x 1.2m

Heat Protection
93,79 €
Protect panels, airboxes and bulkheads from radiant heat with Exoracing gold or silver heat reflective sheet. 1m x 1.2m, adhesive-backed, 450°C continuous.
Add to wishlist
Select options
Quick view
Compare

Exoracing DIY Weldable Exhaust Heat Shield Kit 1000mm x 600mm

Heat Protection
227,79 €
Fabricate a custom manifold or downpipe heat shield with 0.1mm 304 stainless and 4mm insulation rated to 980°C continuously. Includes 2 logo plates.
Add to wishlist
Add to cart
Quick view
Sold out
Compare

Exoracing Turbo Blanket V3

Heat Protection
Exoracing Turbo Blanket V3 for T25, T3 and T4 turbochargers. 1200°C heat protection with carbon or titanium weave, stainless springs and lifetime warranty.
Add to wishlist
Read more
Quick view
Sold out
Compare

Exoracing Titanium or Carbon Exhaust Wrap

Heat Protection
Titanium fibreglass exhaust wrap for manifolds, downpipes and hot exhaust sections. Choose 2.5cm or 5cm width and 5m, 10m or 15m lengths.
Add to wishlist
Read more
Quick view
Compare

Exoracing Gold and Silver Velcro Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Gold and silver Velcro heat sleeve for quick fit hose, wiring and AN line protection. Choose 15mm, 20mm, 25mm or 30mm ID. Rated to 250°C.
Add to wishlist
Select options
Quick view
Compare

Exoracing Silicone Fibreglass High Temperature Heat Sleeve 0.5m

Heat Protection
20,09 € – 29,47 €Price range: 20,09 € through 29,47 €
Protect hoses, wiring and lines from engine bay heat with Exoracing silicone fibreglass heat sleeve. 260°C continuous, 1200°C short, sizes 8mm-30mm.
Add to wishlist
Select options
Quick view
Compare

Exoracing External Wastegate Blanket Titanium or Carbon

Heat Protection
87,09 € – 107,19 €Price range: 87,09 € through 107,19 €
External wastegate blanket for 38, 44, 50 and 60mm wastegates. Titanium or carbon finish, 1200°C rated insulation and locking wire included.
Add to wishlist
Select options
Quick view
Compare

Exoracing Gold And Silver Sewn Heat Sleeve 0.5m

Heat Protection
20,09 € – 30,81 €Price range: 20,09 € through 30,81 €
Exoracing sewn heat sleeve protects hoses, wiring and lines from engine bay heat. Gold or silver, 15mm-30mm ID, 0.5m length, 260°C direct heat rated.
Add to wishlist
Select options
Quick view
Wagner
Recaro

KoshirGarage has been in the automotive industry for a very long time providing the automotive community with the best possible prices on quality name-brand products.

Company Info
KOSHIR GARAGE, SPLETNA TRGOVINA, EMIL KOÅ IR S.P.
Linhartov trg 20,
4240 Radovljica,
Slovenia, EU
VAT ID: SI80523382
Contacts
Phone: +386 40 731 515
info@koshirgarage.com

Terms and conditions
2023 KoshirGarage | All rights reserved.
payments
  • Menu
  • Categories
  • Suspension
    • Bushings
    • Control Arms
    • Other Suspension Parts
    • Replacement Parts
    • Roll Centre Ball Joints
    • Roll Centre Tie Rod Ends
    • Stabilizer Links
    • Strut Bars & Braces
    • Super Angle Tie Rods
    • Sway Bars
  • Engine
    • Air Intake & Breathers
    • Bolt Kits & Dress-Up
    • Engine & Gearbox Mounts
    • Heat Protection
    • Hoses & Clamps
    • Turbo Gaskets & Oil Fittings
  • Wheels
    • Hubs & Lug Conversions
    • Wheel Lug Nuts
    • Wheel Studs
  • Tyres
    • Nankang AR-1
    • Nankang CR-S
  • Interior
    • Seat Mounts & Rails
    • Seats
  • Electronics
    • Accessories
    • CAN Keypads
    • Digital Dashboards
    • ECU + Universal Wiring Kits
    • Ignition
    • Injectors
    • Plug and Play ECUs & Harnesses
    • Power Distribution (PDM)
    • Sensors
    • Throttle Bodies
    • Transmission Control
    • Wiring & Harnesses
  • Accessories
    • Merchandise
    • Tools
  • Exhaust
    • Clamps & Mounts
    • Gaskets & Flanges
    • O2 Sensor Fittings
  • Koshirgarage products
    • Carbon parts
  • Home
  • Shop
  • Blog
  • About KoshirGarage
  • Wishlist
  • Compare
  • Login / Register
Shopping cart
Close
Sign in
Close

Lost your password?

No account yet?

Create an Account
We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.
Accept
Shop
Wishlist
0 items Cart
My account